Yes, the Go Direct® Weather System (GDX-WTHR) has both wind speed and direction.
If you enjoy DIY projects you can also modify the Rotary Motion Sensor (RMV-BTD) or Go Direct® Rotary Motion Sensor (GDX-RMS). Cut some flat stock to create a w...
Create an account to take advantage of helpful online features:
Order online. An account is required for online ordering.Create wish lists. Have your request organized and ready when funding is available.Software Downloads. Download & distri...
If you are using a new version of Microsoft Word and you attempt to open older Word docs, you might see this error message:
To resolve this issue, try changing the File Block settings according to these instructions: http://support.microsoft.com/?...
NIST has a good online reference:
http://physics.nist.gov/PhysRefData/ASD/lines_form.html
enter the element, followed by a I, to get the atomic spectrum. Note the intensity column; typically only the most intense lines are visible using a spec...
The spacing of the wheels on carts made between November 18, 2013, and April 18, 2014, was effectively 0.6 mm narrower than previously. All cart models (Standard Cart, Plunger Cart, and Motion Encoder Cart) are affected. On most tracks, the narrower ...
See Updated information on the late-2013 to early-2014 dynamics cart friction issue for a description of the issue that may require wheel replacement.
First we provide instructions for field replacement of Vernier dynamics cart axles (aka wheels)...
1. Verify that you have a working internet connection.
2. If using Internet Explorer, verify that you are using IE9 or newer. IE8 and earlier will not support exporting to Google Maps.
3. At this time Google Maps export only supports UTM and decima...
The original ProScope from Scalar is no longer supported by current computers (Mac or Windows) and will not work with LoggerPro 3 or ProScope HR software.
Bodelin offers a trade-in program for the original ProScope and will replace it with a ProSc...
It can be a challenge to spin the generator fast enough to light an LED with home-made turbine blades. A red LED requires about 1.75 V in order to emit light. We found that the generator shaft has to be spinning at around 700 rpm in order to produce ...
The 1.0 uL Hamilton syringe Mini GC 1 μL Hamilton Syringe (GC-SYR-MIC) is available from Vernier.
The same syringe can be purchased through the Hamilton Company. A repair kit is also available. A 1.25 inch needle guard/spacer is required to allowed...