The LabQuest file periodic_table_data.qmbl is automatically generated the first time you select to open a LabQuest file. Updates to the data from the Periodic Table App, like those found in LabQuest 2.1, will not be reflected in the file automatica...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.
If you have LabQuest 3, see this article.
Apply the LQ1.7_Reset_Defaults update to restore factory defaults for an original LabQuest. This update does...
Logger Pro is no longer sold and will no longer receive updates.Logger Pro version 3.16.2 is the final release of the software.
Symptom
When the Logger Pro installer is run, the Logger Pro 3 folder in Applications is updated with the new r...
If you enable the internal temperature sensor and get a reading of 79.3C (174.4F) this is most likely caused by a hardware problem on the unit. Contact Vernier Software and Technology Technical Support to arrange a repair....
If you are using the Polarimeter with a LabPro interface, please do the following:
1) Make sure you are using Logger Pro 3.8.5 or newer. To update your software, go to https://www.vernier.com/support/updates/logger-pro/
2) Only rotate the analyzer ...
In Vernier Video Analysis
To change the color of the point plotted on the video, follow these steps:
From the Video tools, click or tap Objects.
Click or tap the color circle shown for the object whose color you want to change.
Adjust t...
Vernier appreciates the importance of young people becoming involved in science fair projects and other science-related competitions. However, our role in assisting students with these projects must be kept to a minimum, while reflecting the high lev...
Unlike some of our other lab books, our Logger Pro 3 software does not contain data-collection templates for the experiments in the Organic Chem lab book. You may set up your own custom data-collection files, if desired, but one of our goals with the...
The Pasco Adiabatic Gas Apparatus can be used with LabPro or LabQuest. You will need three DIN-BTA adapters to connect the sensor leads from the Gas Apparatus to the LabPro.
The Gas Apparatus will also work with the CBL2 or original CBL. In either c...
When a photogate is used with a LabPro in time-based data collection, photogate data is sent by the LabPro to the computer at the end of data collection. If you choose to stop data collection early by clicking the Stop button, the data will not be se...