Our TCA-BTA and GDX-TC thermocouples use a type-K thermocouple wire. We sell a replacement wire for use on these thermocouples as Type-K Thermocouple Wire (KWIRE-TCA). The wire is about 50 cm long.
Note that this is only for our newer, "cold junctio...
The white-light LED in the Optics Expansion Kit (OEK) performs several functions. It is most often used to illuminate the luminous light source for imaging experiments.
When used for the inverse square experiment, it is important to let the LED c...
- The short answer is: Maybe, but probably not. (please see the details below)
- There are two USB4000 models: USB4000 VIS-NIR and USB4000 UV-VIS
They behave differently, so be sure to identify which one you are using, and then follow the appropria...
Generally, rinsing the electrode with distilled water after using should suffice. If the glass bulb looks dirty, you can rinse the electrode with warm water and a mild household dish washing detergent (not Alconox detergent).
If the electrode and ...
Motion Detectors do not provide the best measurement of the acceleration due to gravity. If that is your goal, we recommend using a Photogate and a Picket Fence. There are a few factors that make the Motion Detector less-than-perfect for this type o...
The plastic end caps on Vernier Dynamics carts are bolted on with 3/32-inch hex head screws. The hex key or Allen wrench that you need to remove these bolts is included with the VDS. It is not shipped with individual items CART-S or AS-VDS.
On ear...
64 bit operating systems are best supported in Logger Pro 3.8.3 or newer. If you have an older version of Logger Pro 3, the update is free from:
https://www.vernier.com/tech/lpupdates.html
Both the OHAUS balances and the Watts Up Pro use a device...
The Power Amplifier has two control inputs:
-The BTA input is used for CH4 from LabPro
-The mini-audio input is used for LabQuest.
The LabQuest input overrides the LabPro input, so that if the audio cable is left connected to the Power Amplifier, th...
Connect the two calculators together using the unit-to-unit cable that came with the calculators.
On the Receiving calculator...
Press [2nd][X,T,Ï´,n] (Link)
Press the right arrow key to select Receive.
Press [Enter] to see the message ...
Yes, Vernier does sell a Goniometer.
Goniometer (GNM-BTA)
However, if you already have our Low-g Accelerometer, you can use it to report tilt angle using our Logger Pro 3 software.
The JointAngleSensorLowG.cmbl Logger Pro experiment file is c...