No. The two-sided clear Plastic Cuvettes (CUV), included with SpectroVis Plus (SVIS-PL) and Go Direct® SpectroVis® Plus Spectrophotometer (GDX-SVISPL), can be used for fluorescence experiments. When using these cuvettes, be sure to orient th...
Vernier pH sensors are not designed to be stored dry, but our sensors are pretty tough and the pH sensors can survive being stored dry for a short period of time. Please do the following to test a pH sensor:
Start the data-collection program on y...
Vernier products are designed to be used by students in a classroom. We do not build products for weather balloons. However, some educators have made modifications for their own experiments and successfully collected data at high altitudes. The bigg...
You can install magnets in the Adjustable End Stop (AS-VDS) so that dynamics carts elastically bounce off the End Stop at low speeds. But the magnets must be installed in a certain orientation to work as intended. To install magnets in the adjustabl...
To manually set up a nonauto-ID sensor in DataMate perform the following steps:
1) Connect the sensor to channel CH 1 on the LabPro or CBL 2.
2) Start the DataMate program. After the program gets to the main screen, press the [Clear] button on th...
Recent versions of Logger Pro (3.5 and newer) allow a dynamic numeric range of 1.1e-99 to 1e99.
Older versions have more limited range.
If a column is set to display any number of decimal places, nonzero values may display as zero. To alway...
The current sensor function of the Power Amplifier (PAMP) can be used at the same time as the analog out function of LabPro, but the procedure is not obvious. Logger Pro 3.8.2 produces some potentially confusing dialogs that must be correctly navigat...
None of the Vernier interfaces, e.g. LabPro, will connect directly to the Fourier MultiLog. In order to collect data with the MultiLog and Vernier sensors, you will need an adapter available from Fourier. We have attempted to summarize the compatibil...
There are circumstances in Logger Pro or Logger Lite for OS X where the toolbar can disappear.
In almost all cases, you have clicked the hide toolbar button (a pill-shaped button) at the upper right corner of the Logger Pro window. This hide but...
The nut is a 1/4-20. ...