Yes, will fit PASCO tracks. As shipped, the mounting screws and nuts are positioned to fit the Vernier track. You’ll see a secondary pair of......
Our Power Amplifier will not be automatically recognized by either LabQuest App or Logger Pro. To use it and control the output you need to......
Logger Lite will display the message “No Device Connected” or “no sensors detected” when a device such as a Go!Temp or LabQuest cannot be found.......
We have done some testing to see how much current is drawn by the LabQuest charging station. Below are some data. Note: All these tests......
After upgrading the LabPro with Logger Pro 3.1 or 3.2, if you start the DataMate application and do not use the [CLEAR] button on the......
ChemBio, Physics, and PhySci programs were developed for the original CBL. While you can use them with the CBL 2 or LabPro, we recommend EasyData......
This is a hardware defect in the data acquisition board (DAQ). The unit needs to be repaired. Please contact Vernier Technical Support to set up......
This information pertains to the original LabQuest. If you have LabQuest 2, see this article. There have been reports of LabQuest units freezing when the......
You gain the general use of a computer directly including a mouse, a larger screen, a hardwired network connection, etc. You also gain the power......
LabPro battery life depends on the number and type of sensor being used as well as how frequently data are being collected. Below you will......