The answer to this question is somewhat confusing, but there is an easy solution. Note: This information below assumes you are using sensors with memory chips inside them that connect directly to the LabPro with no adapter. If you are using older sen...
If you are going to make a change to your system such updating a driver or installing a new piece of software, it is possible that the change will break a program or your computer will not work like it did. You may want to return the system to the wa...
Logger Lite will work with LabQuest (all versions), Go! Devices, and LabPro. To use Logger Lite with LabPro or LabQuest, the LabPro USB driver must be installed. Very old versions of the program did not include this driver.
The latest version of ...
There is a product called Total Traffic Control from Lightspeed. It installs a security agent that allows IT managers to control all removable devices on a workstation. Even if everything is set to "Allow," it apparently runs a check on the devices...
If you have a Picket Fence (order code PF) that has blue instead of clear sections, it will not work well. It turns out that the blue color is just from a protective coating that is put on the plastic Picket Fence to protect it from scratches while i...
Logger Pro 3.5 and newer includes an automatic graph match generator. A button will automatically appear in the toolbar for "Graph match" whenever a Motion Detector is connected. To enable the feature for other sensors, choose Settings for (filename)...
The life expectancy for a membrane cap will vary quite a bit depending on frequency of use and if it is stored properly. Most teachers will use it once or twice a month for a few hours each time, then store it properly. With proper care and storage, ...
Digital Radiation Monitor (DRM-BTD, discontinued) shipped before April 2009 included a cable that is not wired correctly. The cable will work for low count rates, but it will not allow for high count rates. Many users will never know of the problem i...
When you save a file from the LabQuest App, the file name will end in .qmbl. The LabQuest App can open .qmbl files to display the experiment results. These files can be moved to a computer using an SD card (original LabQuest and LabQuest 2 only) or ...
No. The Vernier friction pad clamps onto the end of the cart. Since the Pasco carts have a thicker plastic end cap, our friction pad does not fit....