The TI-82 will automatically recognize the Vernier auto-ID sensors and load appropriate calibrations. When you plug in the auto-ID sensor, you will see the "checking sensors" message. The only problem is that the program is not capable of displaying...
This is only an issue for Logger Pro 2 and not Logger Pro 3.
The ILD experiments were originally set for using the ULI interface. Due to minor differences between the ULI and Labpro, a change must be made to this experiment file.
This ILD expe...
According to Hach Co. the glass tubes used with a Vernier Turbidity Sensor can be autoclaved for sterilization purposes. However, the caps cannot. These turbidity cuvettes are catalog number 24347-06 from Hach....
There is a timing error in the abosrbonce vs. time data collection mode in Spectro Pro when data is collected on a Genesys 20 spectrophotometer. Time may be counted too slowly or too quickly depending on the data collection parameters. The workaround...
Technical specifications for each of our sensors can be found on our website under the specifications tab for that sensor.
If you have any questions that can not be answered by the information found on our website, please contact use by ema...
If your HMP-BTD adapter was shipped prior to November 2000, you likely need a revised HMP-BTD. Please contact Vernier Software at (503) 277-2299 to exchange your adapter.
This problem seems to be more noticeable with newer/faster PC's. The extra p...
The problem is that the ULI, or SBI, can only read positive voltages. Listed below are several options to read both positive and negative voltages:
A) Use our Instrumentation Amplifier (takes +/- voltages and amplifies them so that they can be rea...
The Palm Desktop application must be installed and the handheld HotSync'ed successfully prior to installing Data Pro.
You may find the Palm Desktop for Macintosh on the CD that is packaged with your Palm handheld. Or you may download the Palm Des...
Using DataMate and a CBL 2 or LabPro interface
To use an Instrumentation Amplifier with a TI Graphing Calculator and a CBL 2 or LabPro interface, connect your calculator, and Instrumentation Amplifier to the interface and start DataMate. Then do th...
Your digital video camera may have the ability to record video in several different aspect ratios. This setting may adversely affect video analysis in Logger Pro software and Vernier Video Analysis.
First a review of Vernier’s video analysis fe...