CBR 2
In most situations, the CBR 2 (CBR2) is the best choice. The CBR 2 (Calculator Based Ranger) was developed primarily for math teachers who want to quickly collect data. It connects directly to TI-84 Plus and TI-Nspire calculators to colle...
An adapter is available from Data Harvest to make the EasySense DataLogger compatible with most Vernier sensors. We at Vernier have not tested this. Also, compatibility between the EasySense DataLogger and Vernier sensors is limited to the programs ...
The trouble is the surge of current which fires the motion detector. In the old days, when computers were slow, there was enough time between the firing of the motion detector and when the force sensor was read that this was not a problem. Now comput...
The TI-73, 82, 83, 85 only have enough memory available to load one of the Vernier program groups at a time. The TI-86, 83+, 89, 92, 92+, Voyage 200 have enough memory available to load all three programs. If your calculator is currently full, you w...
Upgrade to latest version of GA or Import one list at a time....
Unfortunately the answer is No. The LabPro only works with the Logger Pro software. Since Logger Pro is designed to run on a Pentium, Power Mac or newer computer, that means that LabPro must also do the same.
If you have a an older computer, you ...
The problem is that the PHDERIVS program deletes four list variables from the calculator's memory, and the DataMate program then tries to utilize these lists.
The most recent CBL 2/LabPro operating system update takes care of this problem. See Ho...
Some sensors require a brief warm-up time before they take their reading. We made LabPro and CBL 2 smart so that when they were using AA battery power, they would power up before they take their reading, take their reading, and then go back to sleep ...
Actually there are two ways of storing data with the Datamate program, both of which are described in the Datamate Guidebook, available for download from the following address:
https://www.vernier.com/calc/index.html
1. Saving data in your calc...
If you find that the radiation monitor works normally, but quits working when you start using a DCU (Digital Control Unit), it is because the DCU software is taking over the digital lines and setting them up to be used for output from the LabPro inst...