This document applies for the following sensors: If you press the power button and the Bluetooth LED does not flash red, there is a battery......
It is not usually necessary to perform a new calibration when using the . You can simply connect the sensor to a Vernier data-collection interface,......
The following information describes how to set up Go Direct Photogates (GDX-VPG) when using LabQuest App. If you are collecting data with Graphical Analysis or......
Specifications and User Guide Troubleshooting Additional Troubleshooting Specifications Calibration Calibrate? No. The sensor is set to match the stored calibration before shipping. However, you may......
Specifications and User Guide TROUBLESHOOTING-Primary Test: Confirm that the sensor was properly zeroed. If the sensor does not read zero in the orientation in which......
If Logger Pro is crashing with a specific error message, check to see if the error message is listed here: Most Logger Pro startup related......
While attempting to start Logger Pro, you may encounter the following issues: Logger Pro does not start at all. Logger Pro starts but you see......
The Relative Stability Reading is a unitless, numeric value related to the sensor data output. This value is displayed in the calibration dialog for most......
The supplies up to 500 mA maximum current to each of its eight USB Connectors and up to 100 mA via each “wand” style port......
Logger Lite is no longer updated and is likely to be incompatible with newer computers.Use Vernier Graphical Analysis App instead. Both titles were designed for......