When photogates are used to study the motion of an object, the velocity and accelerations are calculated with a different algorithm than the algorithm used for motion detector data. The reason for this difference is that motion detector data is reco...
Check that you are using fresh batteries. Weak batteries will decrease the range.
Verify that the problem is with the cart instead of the receiver by methodically switching between different combinations of carts and receivers. If the problem follow...
Yes. Photogates can be used with most TI graphing calculators. In addition to the sensor, you will need a sensor interface and software appropriate for your calculator.
TI-Nspire/TI-Nspire CAS—all modelsTI-Nspire Lab Cradle (TI-NSLABC) DataQues...
Go Direct® Gas Pressure Sensor (GDX-GP)
Specifications and User Guide
Troubleshooting
General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for yo...
Gas Pressure Sensor (GPS-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Plug the sensor into a Vernier interface and run the data-collection program. The units for the default readings are kPa and they shoul...
It is not recommended that these products be used in a vacuum or very low pressure environment such as that created by a classroom-grade vacuum pump and bell jar. This could damage the Li-Po battery pouch inside the unit.
Other products with batteri...
RELATED ARTICLES● How do I manually calibrate my sensor in LabQuest App?● How do I calibrate a sensor in Logger Pro?
General Information
In most cases it is not necessary to calibrate sensors; however, for optimum accuracy you may choo...
Logger Pro computer software does not support Go Direct sensors. However, Go Direct sensors are supported on computers using our free Graphical Analysis app. While not as full-featured as Logger Pro, Graphical Analysis can be used to collect and anal...
Overview
Can I use Vernier sensors with Pasco interfaces (or vice versa)?
I have a PASCO product, will it work with Vernier interfaces and sensors?
Will the Motion Encoder Cart and Receiver work with a Pasco track?
How do I use the Pasco Power ampli...
No. Graphical Analysis does not support video analysis.
Instead, use Vernier Video Analysis.
Another solution for video analysis on iPad is Video Physics, a for-purchase app available in the App Store. Video Physics captures video, track an object,...