When you calibrate a Go Wireless PH (order code: GW-PH), typical potential readings are -pH 4 buffer solution: 0.17 volts -pH 7 buffer solution: 0.00......
Calibration Reset Instructions Step 1 – Restore factory default settings Connect the Optical DO Probe to the data-collection interface and start the data-collection program. Choose......
This information pertains to the original LabQuest. If you have LabQuest 2, see this article. LabQuest Battery Calibration: This is a quick procedure that will......
Yes, salinity correction factors can be calculated by using the USGS DOTABLES program at http://water.usgs.gov/software/DOTABLES/ Refer to part C. If the Optical DO Probe or......
This is a known issue with Logger pro version 3.8.6.2. Saving a file with the connected and reopening the file will inadvertently and incorrectly set......
The Vernier PAR Sensor is calibrated before shipping and should not need user calibration. However, you can calibrate the sensor using the Clear Sky Calculator......
Vernier PAR sensors are calibrated before shipping. Each sensor head is calibrated through side-by-side comparisons to reference Apogee Instruments SQ series quantum sensors that are......
Vernier PAR sensors are calibrated before shipping and should not need calibration. You can verify the calibration using the Clear Sky Calculator at: www.clearskycalculator.com The......