Posts tagged with: LQ

Here are a few things to check: 1. Ensure you have compatible versions of the software installed using our installer. The minimum version of Logger......
Continue Reading →
The LabQuest Emulator will not be able to communicate with a LabQuest over USB if a newer USB device driver has been installed by another......
Continue Reading →
If the LabQuest doesn’t detect a sensor when the sensor is plugged into the LabQuest this could be caused by the sensor or the LabQuest.......
Continue Reading →
This information pertains to the LabQuest, LabQuest Mini. As of May 2016 all devices in the LabQuest and LabQuest Mini were converted to use a......
Continue Reading →
If you attempt to collect data for an inelastic collision (using the lumps of clay on the bumper launcher kit) you may find it difficult......
Continue Reading →
The LabQuest Charging Station contains an LED light by each of the 4 charging ports. An LED light glows if current flowing to the port......
Continue Reading →
The long-term life of the battery will vary, but you can expect 400 to 500 full charge/discharge cycles for our LabQuest batteries before the battery......
Continue Reading →
DIY projects that were made with older versions of the LabQuest SDK (NGIO_lib) will not be able to communicate with a LabQuest or LabQuest Mini......
Continue Reading →
To store LabQuest units over the summer, shut them down and store them disconnected from a charger. To fully shut down LabQuest 2, press and......
Continue Reading →
This information pertains to the original LabQuest. If you have LabQuest 2, see this article. There are two ways to delete files from LabQuest: Option......
Continue Reading →