Posts tagged with: pH

To Prepare the water-soil mixture. a. Place 50 g of Soil into a Beaker. b. Add 100 mL of distilled water to the beaker. c.......
Continue Reading →
The main difference is hardware and software compatibility for each type of sensor. Go Wireless sensors were originally designed to allow for data collection on......
Continue Reading →
When testing a pH Sensor (, , ), it is best to place it into a known buffer solution. This allows you to see if......
Continue Reading →
Use the following images to determine the version of your pH Sensor. The dates indicate the approximate time frame when these sensors were sold. For......
Continue Reading →
If you calibrate a PH-BNC electrode with an Electrode Amplifier (EA-BTA), typical potential readings are -pH 4 buffer solution: 1.56 volts -pH 7 buffer solution:......
Continue Reading →
The Tris-Compatible Flat pH Sensor (FPH-BTA) is made of an electrode connected to an Electrode Amplifier (EA-BTA). These special Electrode Amplifiers have been burned so......
Continue Reading →
We do not recommend, nor do we support collecting other sensor data while using a spectrometer. Please note that Logger Pro will allow you to......
Continue Reading →
Vernier does not currently carry any type of microelectrode. This includes pH, dissolved oxygen, and/or any type of ion-specific microelectrode. If you are looking for......
Continue Reading →
We do not recommend using our sensors for long-term data collection. They are intended for use in a classroom during a lab period. Alternative suppliers......
Continue Reading →
There are two issues here: 1) Solutions that are difficult to measure 2) Solutions that will damage the sensor Solutions that are Difficult to Measure......
Continue Reading →