No. These adapters only work with the original CBL . The CBL Photogate Adapter (shown here) and CBL Dual Photogate Adapter (both of which are discontinued) connect to an analog (BTA) channel on an original CBL.
For all other TI and...
Although the Physics program was originally written for the original CBL, it has been adapted to work with the CBL 2 and LabPro interfaces. The use of photogates is different depending on the type of interface that is being used. The program will ad...
We tested a new CPO Photogate in November 2014 using a LabQuest. This photogate worked. There are two things to note about it, however:
- It does not autoID. You have to manually identify it as a photogate.
- The cable used on this photogate could ...
When a photogate is used with a LabPro in time-based data collection, photogate data is sent by the LabPro to the computer at the end of data collection. If you choose to stop data collection early by clicking the Stop button, the data will not be se...
There is a LabPro communications problem in Logger Pro 3.8.5, and is fixed in 3.8.5.1 and newer. The updater is a free download from our web site at:
https://www.vernier.com/tech/lpupdates.html
This issue does not involve LabQuest; it is only Lab...
Here are two common ways to collect data from a rocket launch:
1. For air rockets, the simplest setup to measure the launch velocity is to orient the photogate so that one of the fins on the rocket will pass through the photogate while it is still o...
Extension cables for our sensors are listed below. They are 2 meters long. They have been divided by sensor type
Digital Sensors (Motion Detectors, Photogates, and Radiation Sensors):
Digital Extension Cable (EXT-BTD)
Analog Sensors (Temperature, P...
If your HMP-BTD adapter was shipped prior to November 2000, you likely need a revised HMP-BTD. Please contact Vernier Software at (503) 277-2299 to exchange your adapter.
This problem seems to be more noticeable with newer/faster PC's. The extra p...