Search - Vernier

- Go Direct pH Sensor Troubleshooting and FAQs – Technical ...
- Aug 12, 2019 ... PH ELECTRODE · Type: Sealed, gel-filled, polycarbonate body, Ag/AgCl reference, single junction · Accuracy with new electrode: ±0.2 pH units ...
- https://www.vernier.com/til/3965
- Go Direct Electrode Amplifier Troubleshooting and FAQs ...
- Aug 12, 2019 ... (The green LED will flash to indicate the sensor is connected.) Primary Test: Connect an electrode (such as an ORP or pH) to the Electrode ...
- https://www.vernier.com/til/3858
- Which model pH sensor do I have? (How old is my pH sensor ...
- No interface is required. Replacement electrode: Go Direct® pH BNC Electrode (GDX-PH-BNC); Go Wireless pH and Go Wireless Electrode Amplifier Troubleshooting ...
- https://www.vernier.com/til/4110
- Go Direct ORP Sensor Troubleshooting and FAQs – Technical ...
- Aug 3, 2017 ... (The green LED will flash to indicate the sensor is connected.) Primary Test: Place the tip of the sensor in a buffer solution of known pH and ...
- https://www.vernier.com/til/3967
- Data Collection with Go Wireless pH/Electrode Amplifier FAQs ...
- Jul 13, 2017 ... A: The Go Wireless Electrode Amplifier is terminated with a BNC connector. Therefore, you can use any of our BNC electrodes with it. Preferred:
- https://www.vernier.com/til/3375
- Go Wireless pH and Go Wireless Electrode Amplifier ...
- Aug 13, 2018 ... Go Wireless pH uses Bluetooth low energy technology and can only be used with devices running the appropriate software that support Bluetooth low energy ...
- https://www.vernier.com/til/3272
- What is the difference between the Go Direct Electrode Amplifier ...
- May 18, 2018 ... It has two measurement channels: pH and Potential (mV) and is shipped with the appropriate channel set as the default. It can also be purchased ...
- https://www.vernier.com/til/4187
- The glass bulb of my pH Sensor is broken. Can it be repaired ...
- Nov 7, 2019 ... Go Direct pH Sensor (GDX-PH) (the replacement electrode is Go Direct® pH BNC Electrode (GDX-PH-BNC)) Tris-Compatible Flat pH Sensor (FPH ...
- https://www.vernier.com/til/782
- Go Direct Nitrate Ion-Selective Electrode Troubleshooting and FAQs ...
- Specifications · Range · Accuracy: ±10% of full scale (calibrated 1 to 100 mg/L) · Reproducibility (precision): ±30mV · Interfering ions: ClO4–, I–, ClO3–, F · pH ...
- https://www.vernier.com/til/4348
- Glass-Body pH Electrode BNC: Troubleshooting and FAQs ...
- Jul 19, 2017 ... Choose the desired unit before collecting data. * Electrode Amplifier is required but not included: Electrode Amplifier (EA-BTA), Go Direct ...
- https://www.vernier.com/til/3793
- The pH electrode I have been using no longer seems to work or is slow to respond. Is there anything I can do to fix it?
- When testing a pH Sensor (, , ), it is best to place it into a known buffer solution. This allows you to see if...
- https://www.vernier.com/til/730/
- What type of liquids cause problems for the pH Sensor?
- There are two issues here: 1) Solutions that are difficult to measure 2) Solutions that will damage the sensor Solutions that are Difficult to Measure...
- https://www.vernier.com/til/1599/
- During calibration, what are the typical potential output readings for the PH-BNC electrode?
- If you calibrate a PH-BNC electrode with an Electrode Amplifier (EA-BTA), typical potential readings are -pH 4 buffer solution: 1.56 volts -pH 7 buffer solution:...
- https://www.vernier.com/til/3641/
- How can I keep my pH or ORP storage solution from spilling when the sensor is in use?
- After removing the sensor but before screwing the cap back on the storage solution bottle, place a nickel under the cap and screw the cap...
- https://www.vernier.com/til/728/
- What is the best way to clean the glass bulb of the pH electrode?
- Generally, rinsing the electrode with distilled water after using should suffice. If the glass bulb looks dirty, you can rinse the electrode with warm water...
- https://www.vernier.com/til/706/
- Where do I get pH or ORP Storage Solution? (Buffer Storage Solution)
- We carry pH/ORP Storage Solution with buffer preservative (mold inhibitor) added. Each bottle contains 500 mL of pH/ORP Storage Solution. We sell this as ....
- https://www.vernier.com/til/369/