Search
Mass DTS- Cart and Track System Troubleshooting and FAQs – Technical ...
- May 1, 2015 ... DTS SYSTEMS ONLY. Mass DTS (DTS-MASS); Pulley Bracket (B-SPA); Ultra Pulley Attachment (SPA); Motion Detector Reflector Flag (DTS-FLAG) ...
- https://www.vernier.com/til/2103
- Are the new DTS carts and tracks compatible with the old VDS ...
- Feb 10, 2016 ... * DTS cart masses are not compatible with VDS carts, and vice-versa. The older 500 g masses are black and fill the entire tray of the cart. The ...
- https://www.vernier.com/til/3634
- Motion Encoder System Troubleshooting and FAQs – Technical ...
- Sep 19, 2019 ... DTS SYSTEMS ONLY. Mass DTS (DTS-MASS); Pulley Bracket (B-SPA); Ultra Pulley Attachment (SPA); Motion Detector Reflector Flag (DTS-FLAG) ...
- https://www.vernier.com/til/3153
- 3D Printable Accessories for Vernier Equipment – Technical ...
- Sep 12, 2016 ... For instance, you'll find an extra mass tray for our DTS carts (Standard Cart (DTS-CART-S)), a widget that centers a burette above a Drop ...
- https://www.vernier.com/til/3781
- Go Direct Sensor Cart Troubleshooting and FAQs – Technical ...
- Jan 5, 2018 ... ⚬ Second Point: a known force applied. We recommend a 1 kg mass (9.8 N). Do not exceed the maximum of 50 N during calibration. The Force Sensor ...
- https://www.vernier.com/til/4131
- Why is my acceleration data so noisy in a Half-Atwood machine ...
- Oct 10, 2016 ... In a Half-Atwood machine, a dynamics cart is tied off to a mass hanging over a pulley. ... (DTS-EC); the encoder system measures positions ...
- https://www.vernier.com/til/3400
- Fan Cart Troubleshooting and FAQs – Technical Information Library
- Dec 7, 2015 ... Mass: Varies from cart to cart, but will be about 525 g (standard ... Dynamics Cart and Track System with Motion Encoder (DTS-EC)
- https://www.vernier.com/til/3548
- Cart Guide Troubleshooting and FAQs – Technical Information Library
- Jun 21, 2022 ... ... (DTS-CART-MEC). Dimensions. Length: 101 cm; Width: 5.7 cm; Thickness: 0.23 cm; Mass: ~160 g. Marking on the Cart Guide. You can mark the Cart ...
- https://www.vernier.com/til/15291
- Go!Motion Troubleshooting and FAQs – Technical Information Library
- Dec 1, 2017 ... A mass fell into my Motion Detector and dented the screen. Can the ... Motion Detector Bracket (DTS-MDB); Motion Detector (MD-BTD); CBR 2 ...
- https://www.vernier.com/til/2115
- Which model dynamics cart do I have?
- Over the years, we have made a few different versions of our dynamics carts. If you have inherited a set of carts and tracks, you...
- https://www.vernier.com/til/17745/
- What are the dimensions of the plastic dynamics carts?
- The teal and gray plastic carts that come in the or are approximately 9.5 cm wide, 16 cm long, and 4.5 cm tall. The and...
- https://www.vernier.com/til/15885/
- How do you replace the wheels on the plastic (DTS) carts?
- Replacing the wheel/axle assemblies on our carts is fairly simple. You will need new wheel/axle assemblies for the ones you are replacing. They can be...
- https://www.vernier.com/til/8550/
- Cart Fan Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING– Primary Test: Press the Start/Stop button. The fan should turn on. Select a thrust level using the Selection button and...
- https://www.vernier.com/til/20221/
- Will the metal cart MEC fit into a new plastic cart?
- Yes, the encoder system is exactly the same for both the “old” green carts from our (discontinued) VDS-CART and the new plastic form . The...
- https://www.vernier.com/til/3816/
- How do I connect the Go Direct Force and Acceleration Sensor to a plastic Vernier dynamics cart?
- You will need the larger attachment screw included with the or the one included with . See the photos below for the correct setup. To...
- https://www.vernier.com/til/3974/
- How do I attach the Motion Detector bracket to the Vernier track?
- The includes two thumb screws and a permanently attached pin. To attach it to the Vernier Dynamics System track, follow these steps: Remove the thumb...
- https://www.vernier.com/til/2426/
- Eddy Current Brake Troubleshooting and FAQs
- Specifications and User Guide ASSEMBLY Insert the desired number of magnets into the Eddy Current Brake. The Eddy Current Brake connectors swivel to allow 4...
- https://www.vernier.com/til/4158/
SAVE/SHARE YOUR CART