Search
SparkFun® RedBoard with cable- Arduino and SparkFun RedBoard Troubleshooting and FAQs
- Arduino and SparkFun RedBoard Troubleshooting and FAQs. Arduino is an open-source physical computing platform based on a simple microcontroller board as ...
- https://www.vernier.com/til/3483
- Can the Vernier Arduino Interface Shield be used with 3-volt ...
- Jul 5, 2017 ... LabQuest sensors require a 5.0 volt power supply. The Arduino UNO R3 and R4, as well as SparkFun RedBoard with cable (ARD-RED) are good choices ...
- https://www.vernier.com/til/3233
- Can I use an Arduino Mega 2560 with the Vernier Interface Shield ...
- Aug 13, 2018 ... One thing that may be confusing is that the Mega boards have more pins than an Arduino Uno or the SparkFun RedBoard with cable (ARD-RED), which ...
- https://www.vernier.com/til/3841
- Does the Vernier Arduino Interface Shield work with the Arduino ...
- Oct 25, 2023 ... ... SparkFun RedBoard with cable (ARD-RED). The Arduino UNO R4 Minima and UNO R4 Wifi have the same form factor, shield compatibility, and 5 VÂ ...
- https://www.vernier.com/til/18561
- Can Vernier Sensors be used with MATLAB? – Technical ...
- ... SparkFun RedBoard with cable (ARD-RED) using an appropriate support package: Arduino MATLAB support package: https://www.mathworks.com/help/supportpkg ...
- https://www.vernier.com/til/2512
- National Instruments LabVIEW Troubleshooting and FAQs ...
- Can I use the Radiation Monitor with LabVIEW? RELATED VERNIER PRODUCTS Vernier Arduino Interface Shield (BT-ARD) SparkFun RedBoard with cable (ARD-RED)
- https://www.vernier.com/til/3340
- Why can't I upload my sketch to my Arduino Uno/Redboard?
- There are many pieces involved in getting a program onto your Arduino board, and if any of them aren’t right, the upload can fail. These...
- https://www.vernier.com/til/3482/
- How do I install Arduino libraries for Go Direct sensors or LabQuest sensors?
- Vernier has created Arduino libraries that support both Go Direct sensors and LabQuest sensors. These libraries have been officially added to the Arduino Library Manager....
- https://www.vernier.com/til/10843/
- How should I wrap my sensor cable?
- Some of our sensors include a cable or cord, and it is tempting to wrap it around the sensor for storage. In a short time,...
- https://www.vernier.com/til/2377/
- Can I connect two separate Vernier DCUs to the Vernier Interface Shield?
- Yes. The , has two digital sensor ports. This allows for a , to be connected to each port, for a total of two DCUs....
- https://www.vernier.com/til/3428/
- Where can I find BTA and BTD connectors and sockets?
- If you want to build your own sensors, connect Vernier sensors to your own interface or build your own cables, extensions, interfaces, or adapters. Here...
- https://www.vernier.com/til/818/
- Why doesn't my Vernier Photogate (VPG-BTD) auto-ID?
- This photogate supports auto-ID The Vernier Photogate (shipped since mid-June 2003) has the necessary technology for auto-ID. It can most easily be identified by the...
- https://www.vernier.com/til/1279/
- Can I use older sensors with interfaces that have BTA and BTD ports?
- In general, older sensors from ULIs and Serial Boxes can be used with new interfaces using an adapter. The newer style sensors have a feature...
- https://www.vernier.com/til/661/
- What is the difference between RAD-BTD and RCD-BTD, or the old and new radiation monitor cables?
- There are two different radiation cables in circulation due to differences in radiation monitor design. They are not interchangeable, so only use the cable that...
- https://www.vernier.com/til/1932/
SAVE/SHARE YOUR CART