56 results for "Vernier Dynamics System Replacement Parts Kit"

• Vernier Dynamics System Troubleshooting and FAQs ...

  Vernier Dynamics System (VDS, discontinued) Specifications and User Guide. Vernier Dynamics Systems FAQs How do you take apart a Vernier Dynamics Cart? The nuts to connect the feet to my track don't fit into the slot underneath the track. My Vernier Dynamics Cart jumps off the track when after colliding with the magnetic end stop.

  https://www.vernier.com/til/2103

• Go Direct Force and Acceleration Sensor ...

  REPLACEMENT PARTS Replacement Rod, 5 inch (ACC-ROD) Go Direct® 300 mAh Replacement Battery (GDX-BAT-300) Micro USB Cable (CB-USB-MICRO) Micro USB to USB-C Cable (CB-USB-C-MICRO) Dual-Range Force Sensor Replacement Parts Kit (DFS-RPK) RELATED VERNIER PRODUCTS Air Track Adapter (ATA-DFS) Force Table Adapter (FTA-DFS) Adapter for PASCO Cart (PCA-DFS)

  https://www.vernier.com/til/3924

• Dual-Range Force Sensor Troubleshooting and FAQs

  RELATED VERNIER PRODUCTS –Mass for Dynamics Cart (MASS) –Air Track Adapter (ATA-DFS) –Force Table Adapter (FTA-DFS) –Replacement Rod, 5 inch (ACC-ROD) –Dual-Range Force Sensor Replacement Parts Kit (DFS-RPK)

  https://www.vernier.com/til/1429

• What do you recommend to replace the WDSS? - vernier.com

  The Wireless Dynamics Sensor System (WDSS, discontinued) was discontinued in 2019 because certain parts were no longer available.This multisensor included a 3-axis accelerometer, a force sensor, and an altimeter. When deciding what to purchase as a replacement, consider what experiments you plan to perform.

  https://www.vernier.com/til/4498

• Motion Encoder System Troubleshooting and FAQs

  Vernier Motion Encoder System with Long Track ... discontinued) Motion Encoder Cart for Vernier Dynamics System (CART-MEC, discontinued) Motion Encoder Cart and Receiver (MEC-VDS, discontinued) Motion Encoder Cart Upgrade Kit (MEU-VDS, discontinued) Share this post. Prices shown are valid only for United States. Find my dealer

  https://www.vernier.com/til/3153

• Go Direct Acceleration Troubleshooting and FAQs ...

  Go Direct ® Acceleration Sensor (GDX-ACC) Specifications and User Guide. TROUBLESHOOTING Primary Test: Press the power button on the sensor to turn it on. (The red LED should flash.) Start the Graphical Analysis app on your device and select the sensor from the list of available sensors.

  https://www.vernier.com/til/4083

• How do I save and open files from Vernier Video Analysis on iPadOS or iOS?

  When a file is saved in Vernier Video Analysis it is treated like a downloaded browser file. Manipulating files on iPad and iPhones is not...

  http://www.vernier.com/til/7090/

• Is Vernier Video Analysis available in an app store? Is a single-seat license available?

  Vernier Video Analysis is not available in any app stores . It is only available on a site license basis at this time. See also...

  http://www.vernier.com/til/7081/

• How do I share Vernier Video Analysis with students?

  The site license for Vernier Video Analysis allows you to share the app with your students. Do not share the app with those outside your...

  http://www.vernier.com/til/7069/

• How do Vernier Video Analysis subscriptions work?

  Vernier Video Analysis is distributed on a site license basis. An access URL allows the app to be installed on a device browser. A school...

  http://www.vernier.com/til/7059/

• Vernier Video Analysis Troubleshooting and FAQs

  Vernier Video Analysis is a progressive web app available for Windows, macOS, iOS, iPadOS, Android, and ChromeOS. It is used to perform video analysis on...

  http://www.vernier.com/til/7037/

• How can I fix a broken axle mount on a Vernier DTS cart?

  The damage discussed here would happen only in an extreme situation where someone pushed in the wheel of a Vernier Dynamics Cart and then quickly...

  http://www.vernier.com/til/4414/

• Can I program my mBot via Bluetooth with mBlock 5 software?

  Yes. There are two distinct methods for programming your mBot with the mBlock 5 software via Bluetooth. In both cases we recommend using the ,...

  http://www.vernier.com/til/4474/

• What do you recommend to replace the WDSS?

  The Wireless Dynamic Sensor System was discontinued in 2019 because certain parts were no longer available. This multisensor included a 3-axis accelerometer, a force sensor,...

  http://www.vernier.com/til/4498/

• WDSS Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING Primary Test: There is extensive information on installing Bluetooth radios and establishing radio communications with WDSS, see [til 4429] Secondary...

  http://www.vernier.com/til/1554/

• mBot Troubleshooting and FAQs

  Specifications and User Guide for mBot TROUBLESHOOTING Primary Test: If mBot is new, insert new batteries into battery pack and turn on mBot. mBot should...

  http://www.vernier.com/til/4136/

• What do I purchase to add a second encoder cart to my Motion Encoder System?

  The most likely reason for wanting this would be to plot the motion of two carts in a collision. There are three ways to handle...

  http://www.vernier.com/til/4478/

• Networking for LabQuest 2 and LabQuest 3—FAQ and Troubleshooting

  This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. INITIAL SETUP [til 2725] [til 2726] [til...

  http://www.vernier.com/til/2669/

• Data Sharing - Connected Science System FAQ and Troubleshooting

  The Connected Science System is a networked collection of technology that supports hands-on, collaborative learning with individualized accountability. For step-by-step guides on configuring and using...

  http://www.vernier.com/til/2675/

• Vernier Structures & Materials Tester (VSMT) Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING – Primary Test: The VSMT Force sensor will auto-ID with supported releases of software. – Secondary Test: The VSMT Displacement...

  http://www.vernier.com/til/3344/

• What languages do Graphical Analysis, Spectral Analysis, Video Analysis, and Instrumental Analysis support?

  Our applications for ChromeOS, macOS, Windows, iOS, iPadOS, and Android include Graphical Analysis 4 Vernier Spectral Analysis Vernier Video Analysis Vernier Instrumental Analysis As of...

  http://www.vernier.com/til/4088/

• How do I decide which Dynamics Cart and Track System to purchase?

  We are always happy to help you decide what to buy that will both fit within your budget and work with equipment you already own....

  http://www.vernier.com/til/4407/

• What make and model of computer do you recommend? Should I buy a Mac or a PC?

  We make it a policy of not recommending any specific make or model of computer. We have tested our products on many different configurations of...

  http://www.vernier.com/til/675/

• Vernier UV-VIS Spectrophotometer Troubleshooting and FAQs

  For general instructions, see Specifications and User Guide TROUBLESHOOTING – Primary Test: 1. Connect the AC power supply to the spectrophotometer. Turn the power switch...

  http://www.vernier.com/til/3044/

• How do I install password-protected software from the Vernier website?

  1. Download the file. To do this, click the link you received from Vernier Software. — If you are asked what you want to do...

  http://www.vernier.com/til/2069/

• Vernier Circuit Board 2 Troubleshooting and FAQs

  Specifications and User Guide This article is about the Vernier Circuit Board 2, introduced in late 2015. Information about the original Vernier Circuit Board can...

  http://www.vernier.com/til/3490/

• What sensors and devices are included in the mBot STEM Classroom Kit?

  The comes with the mBot and 2 add-on packs: the Variety Gizmos Add-on Pack, and the Perception Gizmos Add-on Pack. The electronic parts list is...

  http://www.vernier.com/til/4325/

• What Bluetooth radio do I need for Go Direct Sensors and Python?

  To connect to your Go Direct device to Python via Bluetooth® wireless technology, you will need a Bluegiga BLED112 Bluetooth® Low Energy Dongle. https://www.silabs.com/products/wireless/bluetooth/bluetooth-low-energy-modules/bled112-bluetooth-smart-dongle Related...

  http://www.vernier.com/til/4370/

• How long until a Go Direct sensor's battery needs to be replaced?

  This is heavily dependent on use. Although it is warranted for 1 year, we expect that you will get several years of battery use before...

  http://www.vernier.com/til/3875/

• Where do I get replacement lamps for the Vernier Circuit Board (VCB)?

  There are two different lamps provided with our . The Vernier Circuit Board 2 comes with 5 cylindrical bulbs (#48), 2.0 V, 60 mA. It...

  http://www.vernier.com/til/1365/

• Can I purchase individual parts from one of the KidWind kits?

  In working with the KidWind nonprofit organization, we developed kits that are as inexpensive as possible. The kits contain the most popular configurations of the...

  http://www.vernier.com/til/4324/

• Vernier Projectile Launcher Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING – Primary Test: Verify that the Projectile Launcher is powered from either an interface via the photogate cable or from...

  http://www.vernier.com/til/2592/

• Independence of Motion Accessory Troubleshooting & FAQs

  Specifications and User Guide TROUBLESHOOTING Primary Tests: – Does the Vernier Projectile Launcher or Go Direct Projectile Launcher launch a projectile when the Independence of...

  http://www.vernier.com/til/3299/

• How do I analyze slow-motion or high-speed video in your video analysis apps?

  High-speed or high-frame-rate videos are useful for analyzing the motion of objects that move too quickly to capture sufficient frames for analysis in standard 30...

  http://www.vernier.com/til/3081/

• Video Physics Troubleshooting and FAQs

  Video Physics is available only for iPadOS and iOS. It is available in the App Store. https://itunes.apple.com/us/app/vernier-video-physics/id389784247?mt=8 A different and newer application for performing video...

  http://www.vernier.com/til/2340/

• Why should I switch from an air track to a dynamics track?

  A lot of instructors who make the switch tell us that having something that does not make noise is a big improvement to the classroom...

  http://www.vernier.com/til/4292/

• How do I export data from Video Physics to Logger Pro?

  You can export a data file from Video Physics and import it into Logger Pro 3 on your computer for further analysis. To import it...

  http://www.vernier.com/til/2691/

• Ocean Optics spectrometers fail to connect to a computer running Logger Pro for Windows (Windows 8,8.1,or 10).

  Ocean Optics spectrometers, including need to be on a recent firmware version to work with Windows 8, Windows 8.1, or Windows 10. Units with firmware...

  http://www.vernier.com/til/4099/

• How do I create an account on your website?

  For access to our web services, create a free account on our website. If you own Logger Pro 3, you can use your account to...

  http://www.vernier.com/til/2504/

• How do I use Data Sharing when the source is on a different subnet?

  When computer networks are divided into multiple sub-networks (subnets), there are several ways of using the Connected Science System when devices are in a different...

  http://www.vernier.com/til/2752/

• What are the system requirements for Logger Pro and Logger Lite?

  System recommendations for Logger Pro 3.16.1 (released Oct 2020) and Logger Lite 1.9.4 (released May 2018): Any computer purchased in the past three years will...

  http://www.vernier.com/til/1579/

• Is it possible to analyze video in Graphical Analysis 4 on an iPad?

  No. Graphical Analysis 4 does not support video analysis. Instead, use Vernier Video Analysis. Another solution for video analysis on iPad is Video Physics, a...

  http://www.vernier.com/til/2635/

• Can I use my WDSS with the Go Direct Centripetal Force Apparatus?

  You can attach the to the beam of the . This will allow you to collect force and acceleration data. We recommend using the for...

  http://www.vernier.com/til/4260/

• Vernier Data Share (Android): When I try to Download Data, the download never completes.

  A known issue with Chrome for Android results in a download that never completes when selecting Download Data. You may see a status bar in...

  http://www.vernier.com/til/2945/

• How do I use the Data Sharing feature of Logger Pro to send data to Graphical Analysis 4 via Wi-Fi?

  The installation of Logger Pro 3.8.6 and newer includes the option to install support for Data Sharing. WINDOWS Data Sharing is installed by default on...

  http://www.vernier.com/til/2818/

• How do I set up LabQuest 2 or LabQuest 3 and Graphical Analysis 4 to work together via wireless Data Sharing over Wi-Fi?

  Follow the steps below to wirelessly connect LabQuest 2 or LabQuest 3 to a computer, Chromebook, or mobile device running Graphical Analysis 4.  This option...

  http://www.vernier.com/til/2725/

• Data Sharing: How many devices running Graphical Analysis 4 can I connect to a single LabQuest device?

  There is no set limit to the number of connections LabQuest 2 or LabQuest 3 supports via Vernier Data Share or Graphical Analysis 4; however,...

  http://www.vernier.com/til/2663/

• My original LabQuest is stuck on a plain screen displaying "Vernier" text.

  This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article. If your...

  http://www.vernier.com/til/2527/

• How do I attach a mass to a Vernier dynamics cart?

  The and each include a mass with the correct hardware for attachment to a Vernier cart. Here is a photo showing how the included long...

  http://www.vernier.com/til/1452/

• Do you have updated instructions for Advanced Chemistry with Vernier Experiment 21, Electroplating?

  Yes, we have updated written instructions on how to conduct the AP Chemistry Electroplating experiment using the . If the school or department has a...

  http://www.vernier.com/til/2502/

• Optics Expansion Kit Troubleshooting and FAQs

  Specifications and User Guide Center thickness of the three lenses included in the Optics Expansion Kit: 10 cm convex – 8.3mm 20 cm convex –...

  http://www.vernier.com/til/2948/

• I broke the screen on my LabQuest. Can it be repaired?

  We can only replace cracked screens on LabQuest 2 and LabQuest 3 units at this time. We no longer have the parts to replace original...

  http://www.vernier.com/til/1950/

• What are the specs for the generator in the KidWind kit?

  There are two generators associated with the KidWind Wind Energy Kits. Both the Basic Wind Energy Kit and the Advanced Wind Energy Kit come with...

  http://www.vernier.com/til/3155/

• BlueView orange lid separated from the hinged portion.

  Contact Vernier’s Tech Support to arrange a repair or replacement of the lid. If you are comfortable with removing and replacing the lid with a...

  http://www.vernier.com/til/2272/

• Where do I find a replacement power brick and cable for my BlueView Transilluminator?

  To replace an entire adapter and cable for a Blue-View, order .

  http://www.vernier.com/til/3149/

• Constant Current System Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING – Primary Test: Connect the sensor to the interface. Make sure you are using a current version of the software....

  http://www.vernier.com/til/2496/

• Vernier Dynamics System Replacement Parts Kit