Although Vernier does not offer a waterproof case for LabQuest, there are some options to protect your LabQuest if your class is caught in the rain in the field or to keep your LabQuest protected during water quality sampling in the lab.
Note: These...
This information pertains to LabQuest 2.
If you have a LabQuest 3, see this article.If you have an original LabQuest, see this article.
Symptoms
LabQuest 2 displays the LabQuest logo and then gets stuck on that screen, OR
LabQuest 2...
Since iOS 8, it is possible to get the iPad keyboard into a state where it will obscure one or more entry fields of an application. The most common cause is related to the Splitting and Docking of the keyboard.
The simplest way to overcome this is...
To install a certificate you will need the certificate from your security server (refer to your IT department). It needs to be in Base64 encoding with a ".pem" extension (see below for details).
First, save the certificate file onto a micro-SD ...
The most frequent cause of wires becoming detached from the KidWind Wind Turbine Generator with Wires (KW-GEN3) is stress on the connection. Repeated bending of the wire at the point where it is attached to the generator will cause wire breakage.
...
The force sensor portion of the Vernier Structures & Materials Tester (VSMT) may be loose in some units shipped in April 2015.
Tighten the VSMT force sensor (also known as the load cell) connection to the traveling ram by removing the load c...
It is difficult to recommend specific camera models for video analysis because consumer-grade electronics, such as video cameras, change frequently.
Instead of recommending a specific model (only to have it replaced by another that may or may not wo...
SYMPTOMA Motion Encoder Cart fails to record any motion when used with a Dynamics Cart and Track System with Motion Encoder (DTS-EC).
TROUBLESHOOTINGTroubleshooting is easiest if you have multiple Encoder Carts.
Find a receiver and cart and track th...