Go Direct® 3-Axis Magnetic Field Sensor (GDX-3MG)
Specifications and User Guide
Troubleshooting
Primary Test: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started ...
We encourage you to use Graphical Analysis App whenever possible; however, support for some devices require the older Graphical Analysis GW App. Use the information below to determine which application to use based on your devices.
Graphical ...
A spectrophotometer can be set to measure % transmittance and/or absorbance over a wide range of wavelengths. Our Colorimeter can only measure four specific wavelengths produced by internal LEDs. The Colorimeter costs far less, but works for a more l...
Eddy Current Brake (DTS-ECB)
Specifications and User Guide
ASSEMBLY
Insert the desired number of magnets into the Eddy Current Brake.
The Eddy Current Brake connectors swivel to allow 4 mm of height adjustment when installed in a cart. When th...
In the older-style Colorimeter (rounded shape rather than square), the cuvette holder is a plastic insert that can be removed and replaced. The order code for the replacement cuvette holder is CUV-HOLD.
To remove the cuvette holder from your Colo...
In early 2014, some KidWind kits included a 3V/200mA solar panel instead of a 2V/400mA panel. You can differentiate between the 2V/400mA and 3V/200mA solar panels by the arrangement of cells on the panel. The cells on a 2V/400mA panel are arranged 4...
This article refers to experiments using the KidWind 2V/400mA Solar Panel (KW-SP2V).
We have recommended a load resistance for each light source listed below. Note that the recommendations are based on using a single 2V/400mA Solar Panel. If you ...