Logger Pro 3.14 and LabQuest 2.7.2 or newer remember calibration settings between mode changes, so this should not be an issue if you are using the latest version of the software. Make sure you have updated. ...
This combination is not officially supported. You may be able to collect data from a SpectroVis Plus (not Go Direct version) but you will likely have connection issues and/or be frustrated with analysis options.
Instead of Logger Lite, we highly rec...
You should Select Intensity Correction when comparing sources with continuum spectra (e.g., incandescent sources).
Please note that this correction will only work properly if you are using the optical fiber attachment to your Vernier-branded spectro...
For SpectroVis, SpectroVis Plus, Go Direct SpectroVis Plus, Vernier Spectrometer, Vernier UV-VIS and Vernier Fluorescence/UV-VIS:
It is the pathlength of the inside of the cuvette, which is a standard 1.0 cm^2.
...
If you attempt to collect data for an inelastic collision (using the lumps of clay on the bumper launcher kit) you may find it difficult to balance getting adequate force data and meaningful velocity data from the motion encoder.
This is only an iss...
This article refers to the original version of the Force Plate (FP-BTA) (those purchased prior to November 10, 2023). Refer to the video below to determine if this is relevant to your force plate. You should, in all cases, contact Technical Support ...
We have a lot of good options for using Vernier sensors on Chromebooks. Unfortunately, the LabPro is a legacy interface that is not compatible with Chromebooks. All of your sensors will work if you get a new interface. The least expensive option tha...
The power supply for the Power Amplifier is an unusual double power supply. If you look at the connector which plugs into the Power Amplifier, you will see four pins and a metal shield around them. If you hold the shield with the notch on it at the t...
Logger Pro and Logger Lite are no longer receiving updates.Most older versions of these programs can no longer be distributed due to driver licensing.
Logger Pro 3 and Logger Lite have had many different versions over the years. Vernier has added...
Sometimes a student will discover the language setting on the LabQuest and decide it is amusing to change the language to something other than English. Below are instructions to change it back again.
LabQuest 3Tap the Settings icon, , than tap th...