The DCU has a 3-pin connector to connect a servo motor. The DCU line used to control the servo is line 4. The DCU has internal electronics to only allow its 4th line to be turned on when the first three lines are off. You will need to add code to you...
There are many pieces involved in getting a program onto your Arduino board, and if any of them aren't right, the upload can fail. These include the drivers for the board, the board and serial port selections in the Arduino software, access to the se...
The screw used with the Drivetrain Set (KW-DS), to secure the hub to the drive train is a commonly found screw that can be purchased at most hardware stores.
The specifications of the screw are #4-24 3/8"...
There are no plans to update this book. It is no longer available to purchase.
Using the book with Vernier Video Analysis
If you own Physics with Video Analysis and want to use the book with Vernier Video Analysis (and Graphical Analysis Pro -...
If you are using our analog sensors connected to the Hummingbird with the Vernier BTA Sensor Adapter you can use any programming language supported by Hummingbird to program your robot. It appears that the most commonly used languages are Scratch and...
Essentially all of our analog sensors (those ending with -BTA) can be used with the Hummingbird. These will provide a voltage output that can be translated into a sensor reading.
We do not recommend using ion-selective electrode sensors, dissolved o...
Birdbrain Technologies sells an adapter to connect our analog sensors to one or more of the four sensor connections on the Hummingbird.
You can also use our Analog Protoboard Adapter (BTA-ELV) and a breadboard, using https://www.vernier.com/sup...
Yes. Our analog sensors can connect to the Hummingbird with the aid of a connector that is available from the Birdbrain Technologies website: http://www.BirdbrainTechnologies.com
or using our Analog Protoboard Adapter (BTA-ELV) connector, a breadb...
Yes, we do. Our white paper presents research-based evidence supporting the value of probeware as part of effective science instruction.
To obtain your copy, visit https://www.vernier.com/forms/whitepaper/...
When a dynamics track sits unused for a summer or a semester, it may become dusty, depending on how it is stored. Or, a semester of student use may make a track somewhat grimy or gritty. If a track is dirty, it is a good idea to clean it before doing...