We recommend a page on the Flinn Scientific website. Flinn keeps a comprehensive library of the most common chemicals used in K-12 schools. In addition, the SDS documents from Flinn are up to date with references to the newly established (as of 2013)...
Yes, but some special setup is required.
Note: The Go Direct® Structures & Materials Tester (GDX-VSMT) is not supported.
The Vernier Structures & Materials Tester (VSMT) has an analog force sensor and a digital displacement sens...
The Vernier Structures & Materials Tester (VSMT) displacement sensor is not automatically recognized by our software. You can manually set up the sensor in Logger Pro and the LabQuest app by the following methods:1) Logger Pro - Click on Experime...
LabQuest Viewer 2.0 software requires Windows 7 Service Pack 1. Update your Windows 7 software to SP1 or newer in order to use LabQuest Viewer.
Related Topics
Why does LabQuest Viewer 2.0 prompt me about Microsoft .NET Framework on my Windows 7 ...
This information pertains to LabQuest 2 and LabQuest 3.
If you have an original LabQuest, see this article.
The GPS requires an open view of the sky to work well; it is not designed to work indoors. The most likely reason for not seeing satellites...
This capability is part of LabQuest Viewer 2.0 functionality.
What are the system requirements for LabQuest Viewer?
If your computer system is unable to run version 2.0, try the following:
Windows
&nbs...
- LabQuest Viewer version 2.0 is compatible with OS X 10.9 Mavericks and OS X 10.10 Yosemite.
- LabQuest Viewer version 1.0 is not supported.
Related Information:
What are the system requirements for LabQuest Viewer?
Is your software compatibl...
We have two sample experiments available that describe the use of an older model Colorimeter (needing a DIN-BTA adapter) with a LabQuest. One experiment is a Beer's Law lab and the other experiment is a kinetics lab (absorbance vs. time). These two w...
Follow these steps, please.
1) Use a DIN-BTA adapter to connect your Colorimeter to Channel 1 of your LabQuest.
2) Place a blank cuvette (about 3/4 full with distilled water, or the solvent of choice) in the Colorimeter and turn the control knob to 0...
If your Colorimeter does not have a CAL button, use the instructions in the document below to calibrate your Colorimeter.
http://www2.vernier.com/til/1665/colorimeter_calibration.pdf
If you are using EasyData for data collection, Vernier can provid...