Yes, the DO Calibration Solution (sodium sulfite) can be purchased as DO Calibration Solution (DO-CAL). Note that this is for the original Dissolved Oxygen Probe, not for the Optical DO Probe....
Most people who experience difficulty with DO Probes do so because they do not use the proper setup and/or calibration procedures. The procedure for calibration can be found in the DO Probe booklet that came with the sensor (or found online at www.ve...
https://vimeo.com/60666407
The video above walks you through how to make a cliphub using a KidWind Hub (KW-WTH3), wooden dowels, bulldog clips, and a hot glue gun. Making a cliphub allows students to test and try their blades at any angle and w...
Current Probe (DCP-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Plug the probe into an interface and run the data collection program. Use wire leads to connect the probe to a DC supply in series with a know...
Yes. LabQuest 2 and LabQuest 3 built-in GPS is WAAS-enabled (Wide Area Augmentation System). This system utilizes additional data to increase location accuracy (North America and Hawaii only). Accuracy is still dependent on the number and current g...
Charging a cell phone battery from a KidWind Turbine may be feasible but is not practical due to the low power output levels. In checking with our engineering department, they too know of no useful options for this combination of systems. Vernier has...
Yes, the Go Direct® Weather System (GDX-WTHR) has both wind speed and direction.
If you enjoy DIY projects you can also modify the Rotary Motion Sensor (RMV-BTD) or Go Direct® Rotary Motion Sensor (GDX-RMS). Cut some flat stock to create a w...
Create an account to take advantage of helpful online features:
Order online. An account is required for online ordering.Create wish lists. Have your request organized and ready when funding is available.Software Downloads. Download & distri...
If you are using a new version of Microsoft Word and you attempt to open older Word docs, you might see this error message:
To resolve this issue, try changing the File Block settings according to these instructions: http://support.microsoft.com/?...
NIST has a good online reference:
http://physics.nist.gov/PhysRefData/ASD/lines_form.html
enter the element, followed by a I, to get the atomic spectrum. Note the intensity column; typically only the most intense lines are visible using a spec...