This limitation only affects LabPro. LabQuest platforms and interfaces (all models) are unaffected.
A photogate and an analog sensor such as a force sensor are in use together, and both have live readouts that behave normally. However, on data colle...
Logger Lite is no longer updated and is likely to be incompatible with newer computers.Use Vernier Graphical Analysis App instead.
Product Overview
What is the difference between Logger Lite and Graphical Analysis App?
What are the dif...
A 1/4 x 20 nut is the correct size for the accessory rod.
...
Neither Logger Pro nor Vernier Video Analysis automatically creates x and y acceleration columns for video analysis projects. We chose not to create acceleration columns automatically because the quality of video analysis position data is generally ...
Many people want use our software without having to install it on the computer they are sitting at. This can be because IT policies don't allow them to install software or can be a way to save time. If you are using a computer or Chromebook running ...
Ideas found in the User Manual
Analyze a crouched jump. Start with knees bent, hands on hips. Do NOT lower your body further; jump up only. Do not move your arms. This very artificial jump is easier to analyze than a natural jump.
Use the impul...
One thing to check, which is difficult to notice is:
Are both of the power bricks on the power cord connected properly? If only one is connected, the power lamp on the Power Amplifier will come on normally, yet you will get now output from the PAM...
The illumination value is a measure of the light, originating from the LED source, that reaches the light detector. The illumination value is reported in relative units because all the measurements made with the Polarimeter are made in reference to a...
Yes! We have made example experiments available, free of charge.
If you are using the Chemical Polarimeter, those experiments can be downloaded here.
If you are using the Go Direct Polarimeter, those experiments can be downloaded here.
Both versions...
The standard in polarimetry is to use a 10 cm pathlength which is approximately 25 mL in our sample cell. However, because it is not always feasible to have this large a sample volume, you can accurately take readings with sample heights lower than 1...