Check the black ink cartridge - it is most likely out of ink or the print head is clogged. The graph prints using the color inks while the titles use black ink.
...
This can be done using Graphical Analysis Pro or Logger Pro.This cannot be done using the free version of Graphical Analysis.
In Graphical Analysis Pro and Logger Pro, you can display a meter for any calculated column. To show a meter that displa...
This is possible in the graph screen.
1. Go to the graph tab on your LabQuest.
2. Tap the Y-axis label (Absorbance) and select to graph the % Transmittance column.
The digital meter on the right of the graphing window will report the live % Transmi...
Both the Instrumentation Amplifier and the Differential Voltage Probe are true differential voltage measuring devices. Neither terminal is at ground potential, which is sometimes important in making connections to external circuits. However, this can...
Instrumentation Amplifier (INA-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Confirm that the range setting on the sensor is appropriate for the device connected to the Instrumentation Amplifier.
Se...
All Texas Instruments software is distributed through electronic download only. Information for user-account set up (required to use the software) is emailed to the end user or license administrator. Access to installers or web-based apps are availa...
Our TCA-BTA and GDX-TC thermocouples use a type-K thermocouple wire. We sell a replacement wire for use on these thermocouples as Type-K Thermocouple Wire (KWIRE-TCA). The wire is about 50 cm long.
Note that this is only for our newer, "cold junctio...
The white-light LED in the Optics Expansion Kit (OEK) performs several functions. It is most often used to illuminate the luminous light source for imaging experiments.
When used for the inverse square experiment, it is important to let the LED c...
- The short answer is: Maybe, but probably not. (please see the details below)
- There are two USB4000 models: USB4000 VIS-NIR and USB4000 UV-VIS
They behave differently, so be sure to identify which one you are using, and then follow the appropria...
Generally, rinsing the electrode with distilled water after using should suffice. If the glass bulb looks dirty, you can rinse the electrode with warm water and a mild household dish washing detergent (not Alconox detergent).
If the electrode and ...