– Always quit the data collection program gracefully before removing the LabPro from the computer or calculator. When the program quits, it turns LabPro off.......
During data collection, it is possible that EasyData App will quit if the battery level in the calculator gets too low. The power required to......
The CBR 2 can work with the TI-89 Titanium through the I/O port of the CBR 2. It does not work through the USB port......
This information pertains to the original CBL only. There are two scenarios here. Both apply equally to ChemBio, Physics and PhySci programs. Sensor Supported in......
These features are in common Here is how they are different Feature CBR 2 original CBR The minimum distance from the detector 0.15 m 0.50......
1. Perform a soft-reset on the handheld and try HotSync again. Sometimes this is caused by running Data Pro while connected to the HotSync cradle/cable.......
In the Spring of 1997, Knowledge Revolution began bundling our Serial Box Interface and a few of our sensors with their e-Probe software and selling......
The Data Pro conduit was unable to find on the Palm a valid database file that is used to upload data to the computer. To......
The input impedences of our voltage probes are all listed on in the LabPro Technical Reference Manual. For a normal VP-BTA voltage probe used with......
There are two reasons that this message may appear: 1) The path to your Calibrations folder may not be set correctly. Start Logger Pro and......