LEGO® Mindstorms® EV3 units are able to work with Vernier sensors using our LEGO Sensor Adapter for EV3 and NXT (order code: BTA-NXT, $39) and the EV3 "block," which can be downloaded for free at:
https://www.vernier.com/engineering/lego-ev3/ev3-...
The Vernier Sensor Block for MINDSTORMS EV3 software does not have a Zero function. You can easily create a correction in your program to effectively zero the sensor reading:
1. Determine what the sensor is reading when it should read zero. This...
The EV3 was designed to automatically identify EV3 and NXT LEGO sensors that have been connected to any of its input ports. Unfortunately, it does not have the capability at this time to auto-ID sensors from Vernier and automatically defaults to thin...
The exclamation is simply a notification that you have connected a non-LEGO® sensor into one of the EV3 ports. It does not interfere with the operation of the block.
This warning was removed in LEGO® MINDSTORMS® version 1.1.1.
The Vernier se...
You need to import the Vernier Sensor Block into MINDSTORMS. For instructions for downloading the Sensor Block, go to this web page:
https://www.vernier.com/engineering/lego-ev3/ev3-sensor-block/
LEGO® MINDSTORMS® Education EV3 Core ...
To display a sensor reading on the screen of the EV3, you must configure the Display block to allow sensor readings to be wired as input:
1. Drag a Display block onto the programming canvas.
2. Click the Folder button and select Text>Pixels.
3...
The Vernier sensor block for LEGO MINDSTORMS EV3 includes an option for oversampling. Oversampling takes a large number of samples and returns an averaged reading. This is a good feature to use when you need a steady, stable reading. Note that oversa...
The following are a series of troubleshooting steps that should help you find the issue:
1. Check to verify that your EV3 is on. Periodically, the EV3 will shut down when not in use for a length of time.
2. Check that the port number into which yo...
In most cases, the LEGO EV3 program does exactly what you have programmed it to do. If you are having trouble, follow these troubleshooting steps:
1. Look over your program block by block and review your process map to make sure they match.
2. I...
The answer depends on the sensor:
First of all, only sensors with the BTA connector can work with this adapter. This eliminates all the BTD, Bluetooth, and USB sensors.
One of the limitations of the NXT, at least when it is used with MINDSTOR...