Vernier rarely discontinues items, but in August 2016 we made the difficult decision to stop carrying the Watts Up Pro. The manufacturer had become unreliable and could not provide products to us. The issue was getting worse as time progressed, and w...
In working with the KidWind organization, we developed kits that are as inexpensive as possible. The kits contain the most popular configurations of the parts needed to teach the concepts of renewable energy. In many cases, we do sell parts individua...
Yes, salinity can be calculated from the chloride ion concentration using Go Direct® Chloride Ion-Selective Electrode (GDX-CL) or Chloride Ion-Selective Electrode (CL-BTA) using the following equation:
...
This article refers to the Inductor (IND). It also applies to the inductor installed on the Vernier Circuit Board 2 (VCB2).
The resistance of the coil is less than 5 Ω.
The inductor is rated at 200 W.
The wire is 24 gauge copper wire.
The...
The following information describes how to set up wired Vernier Photogates (VPG-BTD) when using Logger Pro 3
If you are collecting data using LabQuest App, see this article.
If you are collecting data with Graphical Analysis or Graphical Analysis P...
Photogate (VPG-BTD)
Specifications and User Guide
Which photogates can I use with Graphical Analysis and Graphical Analysis Pro?
Troubleshooting
Primary Test: Is the shutter positioned properly? A mechanical shutter ...
This photogate supports auto-ID
Vernier Photogate (VPG-BTD)
The Vernier Photogate (shipped since mid-June 2003) has the necessary technology for auto-ID. It can most easily be identified by the white BTD port on the arm of the photogate. (...
Yes, a Vernier photogate and Vernier Time of Flight Pad can be used together to measure the acceleration due to gravity.
You will calculate the acceleration due to gravity using the standard kinematics equation h = 1/2gt^2,
where h is the height, g ...
-Download the attached file named Photogate_templates.lqahttp://www2.vernier.com/til/3849/Photogate_templates.lqa-Copy the file to a USB drive or SD card.-Connect the drive to the original LabQuest (v1.5 or newer) or LabQuest 2.-An updater will run...
This information pertains to Vernier (BTD) Photogates. Photogate (VPG-BTD)
For information about using Go Direct Photogates, see How can I use Go Direct Photogates (GDX-VPG) to time the Science Olympiad Scrambler event?
The S...