Check the position of the sliding shutter on the inside of the photogate. Since the shutter is black, it is easy to miss its position. The shutter slides back and forth to block the phototransistor on the inside of the gate. If the inside of the gat...
In warm, humid environments, the steel balls included with the Vernier Projectile Launcher (VPL) and Go Direct Projectile Launcher (GDX-PL) can corrode as they are not stainless steel. Since the balls need to fit very precisely in the barrel of the l...
If your projectile launcher photogates always reads unblocked or blocked, here are a few things to check:
Clean the barrel of the launcher with a strong gust of compressed air. Dust or debris may be affecting the embedded photogate.
Take the ...
High-speed or high-frame-rate videos are useful for analyzing the motion of objects that move too quickly to capture sufficient frames for analysis in standard 30 frame-per-second videos.
The Camera app on some mobile devices makes it possible t...
A brand new O2 Gas Sensor does not need to be calibrated, but the sensor will drift over time and will need to be calibrated.
To calibrate the sensor, follow the normal 2-point calibration procedure.
-For the first point, push and hold the ca...
This article is for the older Video Physics App for iOS and iPad OS.For information about Vernier Video Analysis app, see Vernier Video Analysis Troubleshooting and FAQs
Video Physics is a for-purchase app available only for iPadOS and iOS from t...
A lot of instructors who make the switch tell us that having something that does not make noise is a big improvement to the classroom environment. Modern dynamics carts make for very low friction experiments, so there is no longer a need for added ex...
You can export a data file from Video Physics and import it into Logger Pro 3 on your computer for further analysis.
To import it into Logger Pro on your computer, first make sure a mail account is set up on your device. Go to Settings app and cho...
The Video Physics App is a legacy app that is no longer being updated. Most users should transition to Vernier Video Analysis.Transitioning from Video Physics to Vernier Video Analysis
Video Physics for iOS is adept at capturing video and marking...
The sensor is factory calibrated. For many experiments, it will not be necessary to calibrate. However, for more accurate measurements, the sensor can be calibrated using a one-point calibration using a known concentration of atmospheric oxygen.
To ...