Specifications and User Guide TROUBLESHOOTING-Primary Test: If your Drop Counter is not counting drops, check the alignment of the sensor beneath the tip of the......
Specifications and User Guide TROUBLESHOOTING -Primary Test: Plug in the sensor and start up the data-collection program. Temperature readings should appear on the main screen......
Specifications and User Guide TROUBLESHOOTING -Primary Test: Connect the Colorimeter. Allow the Colorimeter to warm up for 5 minutes. Place a cuvette, about 3/4 full......
Specifications and User Guide TROUBLESHOOTING – Primary Test: Connect the sensor and run the data-collection program. Hold the tip of the sensor in your hand......
Specifications and User Guide TROUBLESHOOTING – Primary Test: Power the Melt Station using its AC adapter. Turn the control dial on the Melt Station to......
Specifications and User Guide TROUBLESHOOTING -Primary Test: The Go Direct ORP Sensor consists of an ORP Electrode connected to a Go Direct Electrode Amplifier using......
Specifications and User Guide TROUBLESHOOTING – Primary Test: 1. Connect the Constant Current System. 2. Connect the AC power adapter. (Included, but the same as......