The long-term life of the battery will vary, but you can expect 400 to 500 full charge/discharge cycles for our LabQuest batteries before the battery will need to be replaced. A charge from halfway to full would count as half of a charge cycle. It is...
To store LabQuest units over the summer, shut them down and store them disconnected from a charger. To fully shut down a LabQuest, follow these instructions:
• LabQuest 2 or LabQuest 3—press and hold the power button until the Shutdown message is...
If the LabQuest battery has been used heavily or subjected to very high or low temperatures (such as being left in a hot or cold automobile), it may discharge quickly, even after being fully charged. It is possible for this use to permanently diminis...
This information pertains to the original LabQuest and LabQuest 2.
If you have a LabQuest 2, see this article.
LabQuest supports many HP printers. For a list of known and tested HP printers, see Which printers are supported in LabQuest?
We are o...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.
If you have LabQuest 3, see this article.
There are two ways to delete files from the original LabQuest:
Option 1--Update LabQuest App and Delete A...
This information pertains to the original LabQuest and LabQuest 2.
If you have a LabQuest 3, see this article.
LabQuest can be connected to a printer via a USB cable or via the network.
Network:
You either need LabQuest 2, or an original LabQue...
Support for Vernier Analog (BTA) and Digital (BTD) Sensors
The LabQuest emulator runs LabQuest software version 1.5 and supports many of the same sensors as the LabQuest App. Sensors supported with newer versions of the LabQuest app (v1.5.2 and new...
As a standalone device
The original LabQuest is unable to stream data to other devices and cannot be used with the Connected Science System.
As a computer interface
The original LabQuest, used as an interface with a computer running Logger Pro t...
Here are some common issues related to auto-ID of sensors you should check before going further:
A. Some older sensors are not auto-ID capable.
If you are using older sensors with round, DIN plugs and adapters, they are incapable of auto-ID. Some ot...
If a .txt file has been exported to the internal memory of the LabQuest, the LabQuest App will not be able to open or access the file with the LabQuest App. To view the data, open or import it into Logger Pro (or Logger Lite) using the LabQuest Brow...