This information pertains to the original LabQuest. If you have LabQuest 2, see this article. The flash drive or SD card is not configured correctly......
Logger Pro To change the number of points in the derivative calculation, open the File menu and choose Settings For FILENAME. Then adjust the number......
Check the black ink cartridge – it is most likely out of ink or the print head is clogged. The graph prints using the color......
This is possible in the graph screen. 1. Go to the graph tab on your LabQuest. 2. Tap the Y-axis label (Absorbance) and select to......
– The short answer is: Maybe, but probably not. (please see the details below) – There are two USB4000 models: USB4000 VIS-NIR and USB4000 UV-VIS......
Most of the Vernier lab books contain printed instructions specific to Logger Pro for computer. For example, the instructions will refer to opening a particular......
LabQuest Mini gets its power through the computer’s USB port. There are rare cases in which there is a limit to how much power is......
Yes. LabQuest is capable of putting out an analog output signal to the audio out connector. The miniature stereo connector is located on the left......
Yes, you can use a Go!Temp, Go!Motion, or Go!Link with the LabQuest App on any LabQuest unit. Note: If you have an original LabQuest, you......
Logger Pro calculates the “best fit” line on graphs by using linear regression by the method of least squares. The equations used are linked below.......