Interfaces are used to connect sensors to a device (ex: computer, Chromebook™, mobile, tablet.)
In the case of Original LabQuest®, LabQuest 2 or LabQuest 3 they can be used as a standalone device or be used to interface with another device.
...
Note: If you have attempted to set this up before finding this article, you may have some leftover settings that will interfere with the configuration. For a clean start, choose File > New to start a new activity. Be sure to follow all of these s...
This information pertains to LabQuest 3.
If you have an original LabQuest or LabQuest 2, see this article.
Follow these steps to save your lab files to LabQuest 3. At this time, you can only add one file at a time as there is not an automated p...
This information pertains to the original LabQuest.
If you have LabQuest 2 or LabQuest 3, see this article.
There are a few possible causes to this problem:
1. LabQuest is asleep
There is a power management feature that will turn the screen off ...
Here are a few things to check:
Ensure you have compatible versions of the software installed using our installer. The minimum version of Logger Pro needed is
Original LabQuest: Logger Pro 3.6
LabQuest 2: Logger Pro 3.8.5
LabQuest 3: Logg...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.If you have LabQuest 3, see this article.
Normally, the original LabQuest turns on in less than 90 seconds and displays the Meter screen (the screen th...
The LabQuest Emulator will not be able to communicate with a LabQuest over USB if a newer USB device driver has been installed by another application. The newer USB device drivers were first distributed in May, 2016 by the following products:
Logg...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.
If you have LabQuest 3, see this article.
LabQuest (LABQ)
User manual: http://www2.vernier.com/manuals/labquest_reference_guide.pdf...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.If you have LabQuest 3, see this article.
This is typically caused by a corrupt file system on the LabQuest. Occasionally, a device that has been i...
If the LabQuest App doesn't detect a sensor when the sensor is plugged into the LabQuest this could be caused by the sensor or the LabQuest. Keep in mind that some sensors never had the auto-detection functionality in the first place (including every...