7 results for "Luer-Lock Connector"

• Where can I find low-friction glass syringes for combined ...

  PGC Scientific in Gaithersburg, Maryland, about $130 per dozen. The 10-mL syringe with the Luer Lock connector. Aldrich Chemical also sells the “Perfectum” syringes, which were used in the February 2006 Americal Journal of Physics article.

  https://www.vernier.com/til/834

• Can I Order Pressure Sensor Accessories Separately ...

  Luer-Lock Connector (PS-LUER) Plastic 2-Way Valve (PS-2WAY) Stopper Stem (PS-STEM) #5 2-hole Rubber Stopper (PS-STOP5) #1 1-hole Rubber Stopper (PS-STOP1) Plastic Tubing (PS-TUBING) Plastic Syringe (PS-SYR) Plastic Tubing Clamps (Pack of 100) (PTC) The entire kit is also sold as Gas Pressure Sensor Replacement Parts (PS-ACC) Related:

  https://www.vernier.com/til/1352

• Go Direct Gas Pressure Sensor Troubleshooting and FAQs ...

  Go Direct ® Gas Pressure Sensor (GDX-GP) Specifications and User Guide. TROUBLESHOOTING-Primary Test: Connect the sensor and run the data-collection program. The units for the default readings are kPa and they should be reasonable for the altitude at which the sensor is being used (around 101 kPa at sea-level).

  https://www.vernier.com/til/3850

• Gas Pressure Sensor Troubleshooting and FAQs - Technical ...

  Gas Pressure Sensor (GPS-BTA) Specifications and User Guide. TROUBLESHOOTING-Primary Test: Plug the sensor into a Vernier interface and run the data-collection program.

  https://www.vernier.com/til/1406

• How can I tell if my iOS device is compatible with LabQuest Stream?

  If your iPad, iPhone, or iPod touch has a lightning connector or a USB C connector, instead of the 30-pin dock connector, then your device...

  http://www.vernier.com/til/3708/

• The tab on the BTA or BTD connector of my sensor is broken. Can it be repaired?

  Unfortunately, the tab on the connector can not be replaced, and it is not a simple matter to clip off the end of the cable...

  http://www.vernier.com/til/2285/

• Where can I find BTA and BTD connectors and sockets?

  If you want to build your own sensors, connect Vernier sensors to your own interface or build your own cables, extensions, interfaces, or adapters. Here...

  http://www.vernier.com/til/818/

• Luer-Lock Connector