Vernier Software and Technology
Vernier Software & Technology

Getting Started with the Go Direct® Ion-Selective Electrode Amplifier and LabQuest 2 and LabQuest App

Using Bluetooth

  1. Ensure your Go Direct® Ion-Selective Electrode Amplifier is charged.
  2. Turn on your sensor by pressing the power button once. The LED on the sensor will flash red.
  3. Ensure your LabQuest is charged or connected to AC power.
  4. Turn on LabQuest and choose New from the File menu.
  5. Choose Wireless Device Setup > Go Direct… from the Sensors menu.
  6. Choose your Go Direct® Ion-Selective Electrode Amplifier from the list of discovered devices and tap OK. The app will identify the sensor and load a default data-collection setup. The LED on the sensor will now flash green.
  7. Tap the sensor meter and select Sensor Channel…
  8. Select the sensor channel(s) you would like to activate.
  9. Tap OK to exit sensor channel setup. You are now ready to continue your experiment.

Using USB

  1. Ensure your LabQuest is charged or connected to AC power.
  2. Turn on LabQuest and choose New from the File menu.
  3. Connect the Go Direct® Ion-Selective Electrode Amplifier to LabQuest. The app will identify the sensor and load a default data-collection setup.
  4. Tap the sensor meter and select Sensor Channel…
  5. Select the sensor channel(s) you would like to activate.
  6. Tap OK to exit sensor channel setup. You are now ready to continue your experiment.

Compatibility Notes

Labquest 2

Training Videos

Need More Assistance?

Contact support by filling out our online support form or call us toll-free at 1-888-837-6437.

Go to top