This is a Mac OS X 10.9 and later issue only. Among the number of power-saving features that Mac OS X 10.9 introduced, the App......
When using a Digital Control Unit (DCU) with LabQuest, automatic identification of sensors is disabled for the port used by the DCU. This is because......
This information pertains to LabQuest 2. If you have an original LabQuest, see this article. If you have a LabQuest 3, see this article. For......
The long-term life of the battery will vary, but you can expect 400 to 500 full charge/discharge cycles for our LabQuest batteries before the battery......
The power button on a Go Wireless sensor is used to control the power state. – Press the button once to turn on the Go......
A non-auto-ID sensor must be manually identified, regardless of the data collection program in use. Most sensors that are older than 1999 are non-auto-ID. Note......
Below are some frequently asked questions regarding the battery for LabQuest Stream. Q: What does the battery LED indicate about the LabQuest Stream battery? A:......
All solutions sold by Vernier are shipped with a SDS (Safety Data Sheet) which describes disposal considerations. If you have misplaced a Vernier SDS, you......
Q: What does an accelerometer actually measure? A: Normal force per unit mass. Note that it’s not the net force per unit mass (which would......
Specifications and User Guide Troubleshooting Additional Troubleshooting Specifications Calibration Calibrate? Usually, no. The sensor is individually calibrated before shipping. For some experiments, you may use......