To get acquainted with the software and instrument, we suggest following the free lab instructions for "A Guided Inquiry Approach to Understanding Fluorescence Spectroscopy", available on the experiment tab of the product's main web page.This experi...

Increases in heart rate can be caused by numerous artifacts, but the heart rate monitors that use the Snap-On Polar Module  with hand grips, such as the Go Wireless Heart Rate and the Hand Grip Heart Rate Monitor, can pick up changes in the electr...

To import data collected with Vernier data-collection technology into esri apps such as ArcGIS Online, it is necessary to prepare the data in the following way: From Logger Pro Export the data as GIS Format by choosing GIS Format from the Fi...

The LED on the Go!Temp, Go!Motion, Go!Link, LabQuest Mini, or LabQuest Stream is a useful troubleshooting tool: LED ColorDevice StatusSolutionGreenReceiving PowerIdentified by the softwareReady for use.(Note: It is possible for the LED to be Gree...

OHAUS Troubleshooting Connect an OHAUS balance using the appropriate USB cable. Launch the software and choose New from the File menu. The balance should be identified and display live mass readings. If the balance is not identified, make sure...

Some Go Direct sensors have a battery in them for wireless applications. If a Go Direct (GDX) sensor is connected to LabQuest via USB, it will try to charge its battery from the LabQuest battery. This will cause the LabQuest battery to drain very qui...

The following OHAUS balances can be used to collect data with an original LabQuest (v 1.7.5 or newer), LabQuest 2 (v 2.7.2 or newer), or LabQuest 3 (any version). OHAUS Scout® 220 g (OHS-222) OHAUS Scout® 420 g (OHS-422) OHAUS Scout® 120...

We carry the KidWind Power Output Pack (KW-POP) because it is a nice collection of load devices (a simple motor, and three different color LEDs that require different voltages to illuminate). These are great for simple tests of the power output of w...

Our Legal Center addresses this question formally. In particular, see the Vernier Applications Terms of Use and  Vernier Applications Privacy Notice. No application published by Vernier Science Education collects or transmits any student in...

Out of the box, and before connecting your mBot to software, the mBot is set to run the Default Program. While in this state, you can have your mBot operate in the following modes: A. Manual Drive B. Obstacle Avoidance C. Line Following You can...