The CO₂ Gas Sensor is a Gas sensor. You will ruin the sensor if it is placed in water or other solutions. Do not place any of our CO₂ Gas Sensors into water or solutions.
To measure dissolved CO₂ in water or other fluids, you need a dissolv...
When collecting blood pressure data using a Blood Pressure Sensor (BPS-BTA), and LabQuest 2 running LabQuest App 2.8.1, the calculated values for Systolic, Diastolic, Pulse, and Mean Arterial Pressures remain constant after the first run. The graph c...
For instructions on how to connect Go Direct sensors via Bluetooth® wireless technology, see
Troubleshooting Bluetooth Connections with Go Direct Sensors
General Bluetooth Questions
Q: What is Bluetooth?
A: Bluetooth is a common short-range wireles...
Go Direct® Drop Counter (GDX-DC)
Specifications and User Guide
Troubleshooting
Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for your device. (The ...
Drop Counter (VDC-BTD)
Specifications and User Guide
Which Drop Counter do I Have? (How old is my Drop Counter?)
Troubleshooting
Primary Test: If your Drop Counter is not counting drops, check the alignment of the sensor b...
Currently, this is only possible in LabQuest App, Graphical Analysis, and Graphical Analysis Pro. It does not work on Logger Pro.
LabQuest App
Connect the drop counter to your LabQuest. On the meter screen, tap on the mode button and select ...
The Vernier website sends an activation email when you register with us. This step helps confirm that you are the owner of the email address you submitted.
If you did not receive an activation email when you created an account, check your email sp...
For amusement park physics, we recommend using the Go Direct® Acceleration Sensor (GDX-ACC). In addition to the 3-axis accelerometer and 3-axis gyroscope, the Go Direct Acceleration also includes an altimeter. Go Direct Acceleration will fit easi...
Yes. You can use Pasco carts on Vernier tracks and vice versa.
The only limitation is that the Vernier Encoder Cart requires the addition of the Motion Encoder Long Track Strip (METS-LONG), to the Pasco track for operation of the encoder. See Will t...
In some cases, the centimeter-ruled strip on a dynamics track may partially delaminate from the track itself. Our manufacturer recommends a double-sided tape to reattach the strip, found here:
https://www.mcmaster.com/#7139a23/=1anzyxu
If the ent...