Arduino is an open-source physical computing platform based on a simple microcontroller board as well as a development environment for writing software for the board. For introductory materials to using Vernier sensors with Arduino, see:
https://www...
Logger Pro installs and upgrades of version 3.13 and later on Windows 10 will frequently require a reboot to install certain files. The installer is detecting that files that it needs to copy onto the system are already loaded in memory. In order...
The UV-VIS Spectrophotometer comes with a set of two Starna Quartz cuvettes: Quartz Cuvettes (CUV-QUARTZ). The Fluorescence/UV-VIS Spectrophotometer comes with one Starna Fluorescence Quartz cuvette: Fluorescence/UV Quartz Cuvette (CUV-QUARTZ-FUV)
Th...
The Z dimension refers to the position of the light beam transmitting through the cuvette. It is an important specification when working with small-volume samples.
Go Direct SpectroVis Plus: 8.5 mm
UV-VIS Spectrophotometer: 8.5 mm
Fluorescence/UV-VI...
Logger Pro 3.14 and LabQuest 2.7.2 or newer remember calibration settings between mode changes, so this should not be an issue if you are using the latest version of the software. Make sure you have updated. ...
This combination is not officially supported. You may be able to collect data from a SpectroVis Plus (not Go Direct version) but you will likely have connection issues and/or be frustrated with analysis options.
Instead of Logger Lite, we highly rec...
You should Select Intensity Correction when comparing sources with continuum spectra (e.g., incandescent sources).
Please note that this correction will only work properly if you are using the optical fiber attachment to your Vernier-branded spectro...
For SpectroVis, SpectroVis Plus, Go Direct SpectroVis Plus, Vernier Spectrometer, Vernier UV-VIS and Vernier Fluorescence/UV-VIS:
It is the pathlength of the inside of the cuvette, which is a standard 1.0 cm^2.
...
If you attempt to collect data for an inelastic collision (using the lumps of clay on the bumper launcher kit) you may find it difficult to balance getting adequate force data and meaningful velocity data from the motion encoder.
This is only an iss...
This article refers to the original version of the Force Plate (FP-BTA) (those purchased prior to November 10, 2023). Refer to the video below to determine if this is relevant to your force plate. You should, in all cases, contact Technical Support ...