If you are having trouble connecting to an Enterprise network and you keep getting prompted to reenter the passphrase, try the following...
1. Make sure you are running the latest version of the LabQuest software.a. LabQuest 2—Tap Home > Syste...
No.
We do not plan to build or sell either mercury or sodium discharge lamps.
The maker of our discharge lamps does not want to work with mercury for safety reasons.
Sodium requires an oven to melt the sodium, as it is solid at room tempe...
Follow these instructions to remove or replace a Go Wireless® 250 mAh Replacement Battery (GW-BAT-250), in your Go Wireless Link. Follow these instructions carefully as PERMANENT DAMAGE can result if not done properly.
To replace batteries on...
The best way to attach either chipboard or balsa wood to a dowel so it can be used with a KidWind Wind Turbine Hub is to use glue.
If time is short, the best quick-curing option we have found is regular hot melt glue, applied with a standard glue ...
In some cases a Watts Up Pro (No Longer Sold) (WU-PRO, discontinued) may stop collecting data unexpectedly when used on a LabQuest 2. This is a USB compatibility issue with the Watts Up Pro and the LabQuest 2.
Try the following:
1) Try connect...
Conductivity Probe (CON-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Place the toggle switch at the desired setting, run the data-collection program, and take a reading in a solution of known TDS. We sugge...
Yes. Vernier data can be saved in LabArchives, a cloud-based Electronic Lab Notebook application (www.labarchives.com). The procedure varies, depending on which Vernier platform was used.
Logger Pro
Data can be saved into LabArchives directly from L...
Go!Temp (GO-TEMP)
Specifications and User Manual
Troubleshooting
Primary Test: Plug in the sensor and run the data-collection program. Hold the tip of the sensor in your hand and check for the temperature readings to ...
EasyLink (EZ-LINK)User Manual
Troubleshooting
The LED on the EasyLink is a useful troubleshooting tool. When working correctly, the LED on the EasyLink is green. If your LED is not green, check your calculator batteries.
Pro...
Yes.
A Pasco track can be used with the Motion Encoder Cart and Receiver (DTS-MEC). The Receiver will fit on the end of the Pasco track. The cart's wheels will fit on the Pasco track as well.
When setting up the Pasco track, the only tricky p...