A non-auto-ID sensor must be manually identified, regardless of the data collection program in use. Most sensors that are older than 1999 are non-auto-ID. Note non-auto-ID sensors they do not work Graphical Analysis.
An auto-ID sensor is automa...
Below are some frequently asked questions regarding the battery for LabQuest Stream.
LabQuest Stream (LQ-STREAM)
LabQuest® 2, LabQuest Stream™, and Go Direct SpectroVis Plus Battery (LQ2-BAT)
Q: What does the battery LED indicate about the Lab...
All solutions sold by Vernier are shipped with a SDS (Safety Data Sheet) which describes disposal considerations. If you have misplaced a Vernier SDS, you can download it at
https://www.vernier.com/tech/manuals.html
Your own state and local re...
Q: What does an accelerometer actually measure?
A: Normal force per unit mass.
Note that it's not the net force per unit mass (which would be acceleration), but it is the normal force per unit mass. This unusual quantity corresponds with what a rid...
3-Axis Accelerometer (3D-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Make sure that the line marked by the arrow on the label of the sensor is positioned properly to measure the desired acceleration.
...
Vernier BTA and BTD sensors all work based on 5-volts. For more information on that go to https://www.vernier.com/engineering/arduino/
Most Arduino models work based on 5-volts. A few, mostly newer, Arduino models are based on 3.3 volts. ...
TI-SmartView (v4.0 and older) does not have the latest version of EasyData (v2.4) preloaded in the software. Here are instructions for updating the app:
Download EasyData v2.4 at www.vernier.com/easydata
Open the TI-SmartView software for the...
TI-84 SmartView™ CE Emulator Software (TI-84EMU-SNGL1YR-ESW)
Frequently Asked Questions
Q: Does TI only sell subscription software now?
A: Yes. In March of 2022, TI discontinued selling perpetual licenses for all TI software.
...
Yes. Using the tackle provided with the Structures & Materials Testers you can apply a load to a beam in a 3-point and 4-point test. One method is to use high strength line through an eye bolt attached to the load cell. This can be arranged so th...
When you connect the FLIR ONE camera to your device, you might get this message:
This message pops up if you have the FLIR Systems FLIR ONE app installed on your device. In order to use Thermal Analysis with the FLIR ONE camera, tap Ignore.
...