If you are using a DIY kit, which requires you to build your own tower and base, follow these instructions to create a tower from polyvinyl chloride (PVC) pipe.
Parts Needed
90° PVC fittings (4)
6" PVC pipe sections (6)
PVC T-fittings; drill a...
If the video plays in QuickTime player, but not in Logger Pro, you will need to re-compress the video or use a different workflow to create or process the video.
QuickTime can't decode as many video compression formats when called from within an ...
This information pertains to the original LabQuest and LabQuest 2.
If you have a LabQuest 3, see this article.
LabQuest can be connected to a printer via a USB cable or via the network.
Network:
You either need LabQuest 2, or an original LabQue...
This information pertains to the original LabQuest and LabQuest 2.
If you have a LabQuest 3, see this article.
You might see one of the following messages while trying to print from LabQuest:
Printing Failed.
Please check the printer and try aga...
We recommend the Flinn Scientific kit, Organic Solvents for GC Analysis Kit (Flinn Catalog No. AP7480). This kit contains the nine organic substances that are used in the five experiments of the Mini GC Plus lab book. The substances are listed below:...
It is not possible to connect one of our interfaces to an iPad with a USB adapter. The 30 pin and Lightning ports are heavily controlled by Apple ( https://en.wikipedia.org/wiki/MFi_Program ), and our older products won't pass the certifications for...
When you calibrate a Go Wireless PH (order code: GW-PH), typical potential readings are
-pH 4 buffer solution: 0.17 volts
-pH 7 buffer solution: 0.00 volts
-pH 10 buffer solution: -0.17 volts...
Spirometer (SPR-BTA)
Specifications and User Guide
Troubleshooting
Primary Test:
Connect the Spirometer to a Vernier interface (e.g., LabQuest, LabQuest Mini, or Go!Link).
Launch the Data Collection software.
Hold ...
We have a system on our website that lets you download Logger Pro or e-mail a download link to students as needed. You can create a free account at:
https://www.vernier.com/account/?action=register...
The Rotary Motion Sensor Replacement Swivel Mount (RMV-SWIVEL) is designed to screw into the threaded hole of Rotary Motion Sensor (RMV-BTD) on the end opposite the sensor cord. The Ultra Pulley Ultra Pulley Attachment (SPA) then attaches to the pivo...