Our LabQuest sensors all use BTA/BTD (British Telecom Analog/Digital) cables to connect to a Vernier interface. BTA/BTD connectors have 6 pins and therefore BTA/BTD cables contain 6 wires. If you are building your own sensor to use with a Vernier in...

Yes, you can drive the output of the Power Amplifier (PAMP) using Logger Pro software (v3.8 or newer). In addition to the Power Amplifier, you will need one of the following: a LabQuest device—LabQuest 3 (LABQ3), LabQuest 2 (LABQ2), original LabQu...

SensorDAQ (SDAQ) is a lab interface for use with LabVIEW and engineering education. The analog output on SensorDAQ is on the screw terminal connections. It has a 0 to 5 volt output. There are two ways to make the connection from SensorDAQ to the...

Certificate failures typically* are caused by the clock being very wrong (not by seconds, but by days or even years,) while you attempt to do something involving a certificate. There are two things that the LabQuest needs a certificate for: Con...

Arbor Scientific Item # 94-1970 is less expensive than either the Go Direct® Projectile Launcher (GDX-PL) or Vernier Projectile Launcher (VPL). Advantages of the Vernier options include: -More reproducible results because the Vernier version...

The Bumper and Launcher Kit (BLK) is a useful accessory to the Dynamics Cart and Track System (DTS) for impulse-momentum investigations and related experiments. This video shows how to attach the Dual-Range Force Sensor (DFS-BTA) to the bracket and ...

Make sure you are connecting the Photogate (VPG-BTD) to the lab interface using a cable with a white connector (BTD) on the interface end and a black connector (RJ-11) on the photogate end. We do have a different cable (designed for Motion Detec...

Data Share is no longer running. Please report the error to the LabQuest Team. Data Share will be restarted now. If you see this message it most likely means that you are running an old version of the LabQuest software and/or the LabQuest is su...

The only screen-printed electrodes Vernier sells are carbon. However, the GDX-CVS is compatible with ceramic platinum Pt screen-printed electrodes sold directly by Pine Research. There is info about it here. They also offer a sample kit of screen-...

An "ERROR 2" code is displayed directly on the Go Direct Mini GC screen in response to an over-range sensor reading. Occasionally, the reason for the high reading is that one of the compounds in the latest injection has not fully cleared, whether the...