The Ladder Experiment Kit (2DFP-LA) is designed to be used with the Go Direct® 2-Axis Force Plate (GDX-FP2D) or 2-Axis Force Plate (FP2D-BTA) to investigate reaction forces at work on a ladder. It is designed to use either the 1.2 or 2.2 m long ...
The "BTA" analog port on the Go Direct® Force Plate (GDX-FP) is designed for the Lateral Force Accessory (2D-FP). When this accessory is connected to the port, you can activate the Lateral Force channel to get sensor data.
You can also conn...
The Lateral Force Accessory (2D-FP) is an accessory to the Go Direct® Force Plate (GDX-FP) and the Force Plate (FP-BTA). The minimum software releases are as follows:
Graphical Analysis version 6.1
LabQuest 2 LabQuest app version 2.9.1
...
Dynamics Cart & Track System with Go Direct Sensor Carts
DTS-GDX—1.2 m trackDTS-GDX-LONG—2.2 m track
Specifications and User Guide
Which model dynamics cart do I have?
Go Direct Sensor Cart Information
Troubleshoo...
The following are the different versions of the Go Direct® Acceleration Sensor (GDX-ACC) that we have sold. Only the most recent version, released in April 2025, supports Remote Data Logging. Because of hardware differences, sensors that do not ...
Some Go Direct® Tris-Compatible Flat pH (GDX-FPH) were shipped with firmware that can cause the sensor to read a fixed pH of ~6.8 after a custom calibration. This issue can be observed in Graphical Analysis or on LabQuest App.
To confirm that...
CBR 2 (CBR2)
Specifications and User Guide
Which Motion Detector model do I have?
Troubleshooting
Primary test: When you start data collection, do you hear a clicking from the CBR 2? If not, the sensor may be defecti...
Yes, it is possible to use a Vernier Ion-Selective Electrode (ISE) with an Arduino microcontroller. However, we do not recommend this combination unless you are familiar with the sensor's user manual and the complexity of how the sensor works, have ...
Since we started this company in the early 1980's, we have always tried to provide a way for teachers and students to "do their own thing", using our sensors. The following provides a list of coding environments that we support with libraries, docum...
Yes, we have created an Arduino library (named GDXLib) that allows Go Direct sensors to work with certain Arduino microcontrollers. The GDXLib library supports communication between the Arduino board and the Go Direct sensor via Bluetooth (USB is no...