This information pertains to LabQuest 3.
If you have a LabQuest 2, see this article.
If you have an original LabQuest, see this article.
There are three different battery icons shown when running a LabQuest. The icons, used in conjunction with ...
This information pertains to LabQuest 3.
If you have LabQuest 2, see this article.
If you have an original LabQuest, see this article.
Version 3.0.7⚊July 2023
New Features
Added support for revised Go!Motion and CBR 2 connected via USB....
The LabQuest 3 screen by far consumes the most power on the device. Because of this, we have implemented power saving features that help preserve battery life between charges. LabQuest has three power profile options for you to modify the time you...
Printing from LabQuest 3 requires LabQuest v3.0.3 or newer. Updates are available at https://www.vernier.com/downloads/labquest-3-updates/
LabQuest 3 can print to IPP-enabled network printers. IPP, which stands for Internet Printing Protocol, is...
LabQuest has a capacitive touch screen like those found on tablets and smart phones. LabQuest is controlled by touching the screen. Instead of using your finger, you can use a stylus designed for capacitive touch screens (not included) if desired.
...
Yes. The LabQuest® Charge Station (LQ3-CRG) is designed to charge multiple LabQuest 3 units.
LabQuest Charge Station
This charging station can also be used to charge LabQuest 2, LabQuest Stream, and the original LabQuest. However, since La...
Below is a list of differences between LabQuest 3 and LabQuest 2. Features that are otherwise the same are not mentioned.
Hardware
NEW Capacitive touch screen, like a smartphone or tabletLabQuest 3 does not include a stylus or stylus tether.NE...
This information pertains to LabQuest 3.
If you have a LabQuest 2, see this article.
If you have an original LabQuest, see this article.
LabQuest 3 (LABQ3)
User ManualThe user manual is available at https://www.vernier.com/manuals/labq3/...
The Materials Testing: Beams to Bridges with Go Direct® Structures & Materials Tester (GDXVSMT-BB-E) is included with the purchase of the Go Direct® Structures & Materials Tester (GDX-VSMT) or can be purchased separately. When you purchase ...
Sample ChromatogramChemical and ParametersMethanolVolume (µL): 0.3Start Temp (℃): 40 Hold Time (min): 1Ramp Rate (℃/min): 10Final Temp (℃): 60Hold Time (min): 5Pressure (kPa): 18n-HexaneVolume (µL): 0.2Start Temp (℃): 45Hold Time (min): 2R...