LabQuest 2.6.2 • Improved system stability with networking LabQuest 2.6.1 • Improved system stability after reboot LabQuest 2.6 New Sensor Support • Platinum-Cell Conductivity Probe • Pressure Sensor 400 • Sound Level Sensor...

LabQuest 2.5.3 • Addressed an issue related to the data acquisition (DAQ) software LabQuest 2.5 New Sensor Support • Vernier Structures & Materials Tester • Go Wireless Heart Rate* New Features • Included support for data collect...

This interface is no longer available. Information is presented for reference only. Go Wireless® Link (GW-LINK, discontinued) Specifications and User Guide Hardware & Software Requirements Go Wireless Link uses Blu...

LabQuest support for Go Wireless sensors FAQsQ: What LabQuest units can collect Go Wireless sensor data?A: LabQuest 2 and LabQuest 3. However, some LabQuest 2 interfaces require an external Bluetooth radio, Go Direct® Bluetooth® Adapter (GDX...

This sensor is no longer available. Information is presented for reference only. Go Wireless® Temp (GW-TEMP, discontinued) Specifications and User Guide Hardware & Software Requirements Go Wireless Temp uses Blueto...

LabQuest 3 LabQuest 3 units work with all Go Direct (GDX) and Go Wireless Sensors. Note: Go Direct Spectrometers can only be connected via USB as wireless communication is not supported. Compatible with Go Direct sensors Compatible with Go...

The damage discussed here would happen only in an extreme situation where someone pushed in the wheel of a Vernier Dynamics Cart and then quickly released it to cause a loud click. This can break the plastic that holds the axle in position. We have f...

Differential Voltage Probe (DVP-BTA) Specifications and User Guide Troubleshooting Primary Test: Are the leads properly and securely connected? The probe is designed to be used like voltmeter leads. It should be placed ac...

This sensor is no longer available. Information is presented for reference only. Vernier Optical DO Probe (ODO-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the Vernier Optical DO Probe to th...

Anemometer (ANM-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the sensor to the interface and launch the data collection software. Secondary Test: Blow onto the sensor to make sure the readings c...