Dual-Range Force Sensor (DFS-BTA)
Specifications and User Guide
Which version Dual-Range Force Sensor do I have?
Troubleshooting
Primary Test: Does the sensor read near zero when no force is applied? Does the sensor read a...
All Vernier made equipment has a Vendor ID (VID) of: 08F7
Specific Vernier Product IDs (PID):
Product NamePIDLabPro0001Go! Temp0002Go! Link0003Go! Motion0004LabQuest (original)0005SpectroVis0006Mini GC0007LabQuest Mini0008SpectroVis Plus0009UV...
The main difference is hardware and software compatibility for each type of sensor. In addition, the older Go Wireless sensors connect via a wireless Bluetooth connection, whereas Go Direct Sensors connect via USB or Bluetooth.
Go Direct S...
Below is a thorough list of Vernier equipment that supports AP Physics C: Mechanics and Electricity and Magnetism. Since no two physics instructors teach AP physics in exactly the same way, this list may not have everything needed or may include sen...
Here are a few things to check:
Ensure you have compatible versions of the software installed using our installer. The minimum version of Logger Pro needed is
Original LabQuest: Logger Pro 3.6
LabQuest 2: Logger Pro 3.8.5
LabQuest 3: Logg...
The difference is in the way the data are displayed in Logger Pro. When you look at the digital meter window, you are seeing a number that is the average of many readings taken between the times the display is changed. Noise is averaged out.
When ...
In order to use the Go Direct Sensors via wireless with Graphical Analysis, Graphical Analysis Pro, Instrumental Analysis, or Spectral Analysis on a Mac, you need to be on macOS 10.11 or newer, and your hardware needs to support Bluetooth 4.0 (also k...
The web browser cookie is corrupted and needs to be deleted. The web browser cookie stores a cart ID number that is mismatched, so changes to the cart don't go anywhere.
The recommended solution is to delete the web browser cookie. You can delete ...
Logger Pro is no longer sold and no longer receives updates. For more information, see Logger Pro will no longer receive updates
System recommendations for Logger Pro 3.16.2—released March 2021
Any computer purchased in the past three years...
When using a Colorimeter (COL-BTA) on the 565 nm setting with a Go!Link (GO-LINK) or EasyLink (EZ-LINK) interface, you may occasionally see a bad value, typically 108% T, after calibration. This value should be closer to 100% T. This problem is ...