We have tested the Arduino Mega 2560 (5-volt version) with our Vernier Arduino® Interface Shield (BT-ARD), and it works, with limitations. One thing that may be confusing is that the Mega boards have more pins than an Arduino Uno or the SparkFun® ...
There are two applications with similar names available for iOS, iPadOS and Android devices.
Icons for Graphical GW (older application, left), Graphical Analysis App (v4.x – v5x, center), and Graphical Analysis App (v6.x and newer, right).
G...
Yes, that is possible. The LabVIEW installers found on the LabVIEW Downloads page, place the correct drivers, menu items, and example folders into an existing installation of LabVIEW, so that LabVIEW users can use Vernier sensors and interfaces in t...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.
If you have LabQuest 3, see this article.
LabQuest (LABQ)
User manual: http://www2.vernier.com/manuals/labquest_reference_guide.pdf...
Colorimeter (COL-BTA)
Specifications and User Guide
What model Colorimeter do I have?
Troubleshooting
Primary Test: Connect the Colorimeter to a Vernier Interface. Allow the Colorimeter to warm up for 5 minutes. Place a ...
The Digital Control Unit Power Output Kit (DCU-POP) is a great starter set of output devices for use with the Digital Control Unit (DCU-BTD). The kit includes several output devices, including a motor, LEDs, incandescent light bulbs, and connecting w...
Logger Pro is no longer sold and will not receive updates.
Short Answer: Vernier makes an MSI installer for Logger Pro. Anyone logged into an authorized account on our web site can get this installer.
Long answer: With each new version of Logg...
Go Direct® Light and Color Sensor (GDX-LC)
Specifications and User Guide
Troubleshooting
General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for...
This information pertains to the original LabQuest.
If you have LabQuest 2 or LabQuest 3, see this article.
If your LabQuest is not powering on at all, that is the power button LED is off and the screen is black, even when connected to AC power...
The preferred way to replace the AC adapter port on an original LabQuest is to replace the UAP (USB, Audio, Power) circuit board in the unit. Unfortunately, we no longer have replacement boards available as some component parts that make up the board...