This information is for iOS and iPadOS devices only. For Android devices, see Graphical Analysis GW for Android FAQ and Troubleshooting.
Graphical Analysis—Go Wireless
View in App Store
How do I install the latest compatible version o...
Note: These instructions only apply to the Go Wireless products (discontinued in 2017.) These are separate from the newer Go Direct products.
If you have a classroom set of Go Wireless Devices it can be hard to tell one from another because they are...
Graphical Analysis App
Connect the amplifier to your device using Graphical Analysis app (v4.5 or newer).
Click or tap sensor setup, .
In the Sensors dialog box, click or tap Sensor Channels.
Check the box for the desired unit
Cli...
Tablet and Mobile Device Support for Go Wireless Sensors FAQsQ: Can I use Go Wireless sensors with an iPad, iPhone, or iPod touch?A: Yes. Go Wireless supports iPad (3rd generation and newer), iPad mini, iPad Air, iPhone (4S and newer), and iPod touc...
We have tested the Arduino Mega 2560 (5-volt version) with our Vernier Arduino® Interface Shield (BT-ARD), and it works, with limitations. One thing that may be confusing is that the Mega boards have more pins than an Arduino Uno or the SparkFun® ...
There are two applications with similar names available for iOS, iPadOS and Android devices.
Icons for Graphical GW (older application, left), Graphical Analysis App (v4.x – v5x, center), and Graphical Analysis App (v6.x and newer, right).
G...
Yes, that is possible. The LabVIEW installers found on the LabVIEW Downloads page, place the correct drivers, menu items, and example folders into an existing installation of LabVIEW, so that LabVIEW users can use Vernier sensors and interfaces in t...
This information pertains to the original LabQuest.
If you have LabQuest 2, see this article.
If you have LabQuest 3, see this article.
LabQuest (LABQ)
User manual: http://www2.vernier.com/manuals/labquest_reference_guide.pdf...
Colorimeter (COL-BTA)
Specifications and User Guide
What model Colorimeter do I have?
Troubleshooting
Primary Test: Connect the Colorimeter to a Vernier Interface. Allow the Colorimeter to warm up for 5 minutes. Place a ...
The Digital Control Unit Power Output Kit (DCU-POP) is a great starter set of output devices for use with the Digital Control Unit (DCU-BTD). The kit includes several output devices, including a motor, LEDs, incandescent light bulbs, and connecting w...